BSOD caused only with dual screen arrangement.

[Erick Aguilar]

Hello guys, I was wondering if you could give me some assistance on the matter..
For full detail, please refer to this thread:

http://www.sevenforums.com/graphic-cards/277153-dual-monitor-causing-crashes.html

As you can see I'm experiencing a rather funky issue only when I have dual monitors, and after gaming only.

I have attached the screenshot of the analysis from bluescreen viewer.
Thank you very much for your help, and please ask as many questions as needed.

 

[Arc]

This is a Graphics/Display related BSOD, caused by any display related elements.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

[URL="http://www.carrona.org/bsodindx.html#0x00000116"]BugCheck 116[/URL], {fffffa800772c4e0, fffff88006e1d8b4, 0, d}

*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+98b4 )

Followup: MachineOwner
---------

Follow this guide: http://www.sevenforums.com/crash-lo...op-0x116-video_tdr_error-troubleshooting.html

 

[Britton30]

If you have Catalyst Control Center installed, remove it, it causes more problems than it gives benefits.

• Try other HDMI cables.
• Confirm your GPU power cables are fully seated.
• Confirm the card is fully seated in the slot.
• If you have ever had a nVIDIA card, left over driver bits will interfere with AMD drivers.

 

[Erick Aguilar]

If you have Catalyst Control Center installed, remove it, it causes more problems than it gives benefits.

• Try other HDMI cables.
• Confirm your GPU power cables are fully seated.
• Confirm the card is fully seated in the slot.
• If you have ever had a nVIDIA card, left over driver bits will interfere with AMD drivers.

Why? I can't control my graphic settings exactly how I want without it. It's like removing the tweak tools for Nvidia.

 

[gmdodt]

Erick have you found a solution to this problem? I am having the EXACT same issue

 

[Boozad]

Erick have you found a solution to this problem? I am having the EXACT same issue

Post a new thread following the instructions at the top of the forum instead of necroing a two year old thread.