BSOD crash after installing updates to Vista to Windows 7 uprade

[mnsteven]

I used the Windows 7 Home Premium Upgrade CD to upgrade from Vista to Windows 7 (32 bit). The installation was successful through the .NET upgrade, but I had problems once I installed the (57) updates. The first time I went through the process, the system froze, I had to restart in safe mode a couple of times, etc.

I finally restored the system to the state it was in before the .NET upgrade (the first restore point available - the restore to the second restore point failed). I then let the system do the .NET upgrade and tried to install the (57) updates again. The system again crashed with the dump that I am attaching. The update information shows that the updates failed and they are now queued to be installed again.

The laptop is a Lenovo Thinkpad T60 - just under 4 years old
Vista came with the system and was at the Syspack 2 level
Windows 7 upgrade was the retail version (3x version). I was able to install it without problems on my husband's Thinkpad T61

 

[Lemur]

Welcome to SF.

Unable to load image \SystemRoot\System32\Drivers\NIPALK.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NIPALK.sys
*** ERROR: Module load completed but symbols could not be loaded for NIPALK.sys
Probably caused by : NIPALK.sys ( NIPALK+120e6 )

NIPALK.sys Mon May 12 17:21:05 2003

Update your video driver:
Driver c:\windows\system32\drivers\igdkmd32.sys (8.14.10.1930, 4.59 MB (4,808,192 bytes), 9/23/2009 8:18 PM)

Update your network driver:
Driver c:\windows\system32\drivers\e1e6032.sys (9.7.255.0, 218.13 KB (223,360 bytes), 3/5/2008 5:43 PM)

Update your wireless network driver:
Driver c:\windows\system32\drivers\netw5v32.sys (12.4.1.4, 4.04 MB (4,231,168 bytes), 6/10/2009 5:18 PM)

Update your audio driver:
Driver c:\windows\system32\drivers\adihdaud.sys (6.10.1.5410, 336.00 KB (344,064 bytes), 6/6/2007 10:46 PM)

 

[mnsteven]

BSOD's still happening

I am still getting the BSOD. I restored back to a state without the Windows updates. I updated the Wireless Network driver. Then I shut down the system and all the Windows updates were applied. I brought the system back up and applied the latest Soundmax driver. I shut down the system after applying the Soundmax driver and then I got the BSOD. The network driver info says it is current and I cannot find the video card or driver under system hardware. I updated the Intel wireless driver from the Intel site.

I am attaching the latest dumps and perfmon files. Following are the details provided when I brought the system up in safe mode

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 89DA5BF0
BCP2: 00000002
BCP3: 00000001
BCP4: 82CBC1B9
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\010811-61916-01.dmp
C:\Users\Margaret\AppData\Local\Temp\WER-88312-0.sysdata.xml

 

[mnsteven]

Blue screen message - IRQL_not_less_or_equal

I finally looked at the blue screen message which is IRQL_not_less_or_equal. The web says this could be a registry problem. I would need to know how to fix this

 

[Lemur]

Here is the link for the latest drivers for your T61.

http://www-307.ibm.com/pc/support/site.wss/migr-67853.html

Your wi-fi is current, but please update:
Intel(R) 82566MM Gigabit Network Connection
c:\windows\system32\drivers\e1e6032.sys (9.7.255.0, 218.13 KB (223,360 bytes), 3/5/2008)

 

[mnsteven]

Is the link good for a T60 as well

Hi - I have a T60 - not a T61 - is the link the same?

Never mind - I found the lenovo link for T60
Thanks

 

[mnsteven]

Disabled gigabit network driver

I could not update the driver for the gigabit network card - I downloaded the driver, but the system would not install it. I kept getting the message that the driver installed was the correct one and the latest one. I disabled the ethernet card since I usually work with wireless and that allowed me to shutdown cleanly. At some point, I will have to figure out how to update the driver.

Thanks for the help

 

[mnsteven]

I spoke too soon

My system seemed to be ok and I was able to shutdown cleanly a couple of times. Then I allowed Microsoft to update my software again and then it started crashing again. I have now backed out to a clean restore (although I think it still crashes, but at least I can bring up windows). I also had used the control panel to update all the drivers from the internet - I let the tool find and update drivers. When I shutdown to activate, I got another dump which I am attaching along with the perfmon report.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 89DA7BF0
BCP2: 00000002
BCP3: 00000001
BCP4: 82CB11B9
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\010911-57423-01.dmp
C:\Users\Margaret\AppData\Local\Temp\WER-141149-0.sysdata.xml

Are there any other suggestions? Where can I find instructions on how to read the dumps? Thanks

 

[Hopalong X]

Dont install all the Windows up dates at one time.

Picture on left below open Windows update. Click yellow circled Change Settings.

Right picture- Change the drop curtain as mine is. Click OK.

When updates download then you will be able to pick to install 1-3 at a time instead of 57 at once.

Mike