BSOD crashes randomly while gaming

[Sylarxz]

This section is resolved, but it's still relevant to my problem

My computer's been bsoding more and more recently can someone find out why? I've tried updating my chipset, audio and graphic drivers but the crashes are still happening. I should also mention that sound on my computer randomly dies when i'm gaming or just on youtube for a long time. It's not a loose cord or anything, but there's just no audio coming.
Attatched are some of the recent dump files from the bsods

Thanks in advanced

Edit:
The new problem after the above was fixed.

My computer bsod again after being okay for 5 days.
I ran verifier and rebooted my computer. This time i was able to boot into W7 but it would not load and just froze with the taskbar and dekstop. Applications like msn that start up on windows startup did not open.

Since i couldn't use my desktop and there was no bsod, i had to disable verifier. Attatched (bsod#2) is the dump file for the bsod i had, but it's not one from verifier since i had no crash (the computer just froze with verifier enabled).

Can someone please check the dump file to see what the issue is?
Your help is very much appreciated since i have no idea how to do it myself =)

 

[bagavan]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys

Perform this and post back the results

http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

also

http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

 

[Sylarxz]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys

Perform this and post back the results

http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

also

http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

Thanks, will do. So should i run prime95 overnight first then use verifier for the next day then disable before night?

 

[bagavan]

First run driver verifier

 

[Sylarxz]

okay, for how long should i run it?

edit:
Okay nvm lol, i enabled it and i couldn't even boot into windows. It gave me a bsod the two times i tried so i disabled it in safe mode.
Attatched are the dump files, i hope they'll help. Thanks you I'll also run prime95 in the morning. Should i not be doing anything on my computer while it's stress testing? (ie gaming/browsing)

 

[bagavan]

update/ uninstall NetLimiter.

NetLimiter - The Ultimate Bandwidth Shaper

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {f6, 188, fffffa8006470450, fffff88003a42d86}

*** [B][U][COLOR="Red"]WARNING: Unable to verify timestamp for nltdi.sys
*** ERROR: Module load completed but symbols could not be loaded for nltdi.sys
Probably caused by : nltdi.sys [/COLOR]( nltdi+1d86 )[/U][/B]

Followup: MachineOwner

 

[Sylarxz]

o: thanks
Should i give verifier a go again after uninstalling or run prime95?

 

[bagavan]

If you have already uninstalled the net limiter software wait for a few hours to see if the BSOD persists.

 

[Sylarxz]

okay, thanks again =)

 

[Sylarxz]

My computer bsod again after being okay for 5 days.
I ran verifier and rebooted my computer. This time i was able to boot into W7 but it would not load and just froze with the taskbar and dekstop. Applications like msn that start up on windows startup did not open.

Since i couldn't use my desktop and there was no bsod, i had to disable verifier. Attatched (bsod#2) is the dump file for the bsod i had, but it's not one from verifier since i had no crash (the computer just froze with verifier enabled).

Can someone please check the dump file to see what the issue is?
Your help is very much appreciated since i have no idea how to do it myself =)

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[Sylarxz]

bump

 

[bagavan]

This is your error
Usual causes: Hardware, Incompatibility, May be driver corruption

http://www.carrona.org/bsodindx.html#0x00000124

Rerun driver verifier again and upload the dumps.

 

[Sylarxz]

This is your error
Usual causes: Hardware, Incompatibility, May be driver corruption

BSOD Index

Rerun driver verifier again and upload the dumps.

Thanks! Is there something i could do to scan for the specific part/thing that's causing this problem?

When i run verifier, i get past the W7 splash screen, my desktop loads but then it freezes and i'm unable to use it.
I use rainmeter on my computer and idk if this is relevant or not, but my pc freezes before rainmeter loads (with all the stuff on the desktop)