BSOD Driver Power State Failure whilst playing GMOD

[Shaunus117]

Hello,

Ever since getting my New gaming PC (back a year ago) I have been getting BSOD for driver power state failure. These have been very uncommon but have recently sprung back up again.


I have attached the zip file from the debugging program I found on your forums.

I appreciate any help you can offer,

Thanks.

 

[Dsprague]

IT looks like your Problems are being cause by yourIphone/pod driver, and by your USB driver:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800a04cc80, fffff80000b9c518, fffffa8007397bd0}

[COLOR=Red]*** WARNING: Unable to verify timestamp for usbaapl64.sys
*** ERROR: Module load completed but symbols could not be loaded for usbaapl64.sys
Probably caused by : usbaapl64.sys[/COLOR]

Followup: MachineOwner
---------

Driver Reference Table - usbaapl64.sys

For the Iphone/pod driver try going to the device manager and uninstalling the driver from there, then plug the Iphone/pad back into the computer and it should re-install the driver for you

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800d6c5d00, fffff80000ba2748, fffffa80085a26b0}

[COLOR=Red]*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys[/COLOR]
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
[COLOR=Red]Probably caused by : EtronHub3.sys[/COLOR]

Followup: MachineOwner
---------

Driver Reference Table - EtronHub3.sys

Looking at the time stamp on this driver we can see that it is probably out of date:

kd> lmvm EtronHub3
start             end                 module name
fffff880`04e9c000 fffff880`04ea5b80   EtronHub3 T (no symbols)           
    Loaded symbol image file: EtronHub3.sys
    Image path: \SystemRoot\System32\Drivers\EtronHub3.sys
    Image name: EtronHub3.sys
    Timestamp:        [COLOR=Red]Wed Jan 26 05:54:00 2011[/COLOR] (4D3FFD48)
    CheckSum:         00009F05
    ImageSize:        00009B80
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please update the driver from here: Etron Technology, Inc.

 

[Shaunus117]

Hi,
Thanks for the quick reply!

I followed your instructions to sort out my drivers. Seeing as my blue screens are uncommon, I am unsure whether the problem has been solved but most likely they are.

I will definitely return here if in need for further help.

Thank you very much!

 

[Dsprague]

Glad I could help.