BSOD during sleep mode

[elyk371]

My computer is Blue screening when in sleep mode. No problems when I'm using it or idle. Also it doesn't crash immediately. I can put it to sleep and come back within 2 hours or so and it will come out of sleep normally. However, if I leave it overnight(6+ hours), I will need to push the power button to start it. Then when windows boots up I get a "Windows has recovered from an unexpected shutdown"

This has only started happening since I reformatted and reinstalled windows about 2 weeks ago. Sleep mode worked flawlessly on my previous installation.

Specs:
Win 7 Ult x64 Retail
Intel i7 920
Asus P6TD Deluxe
6gb Ram
Seagate 1TB 7200rpm

 

[yowanvista]

Update your Marvell Yukon Gigabit driver, it was the cause of your crash
Marvell: Support

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80062ac060, fffff80000b9c518, fffffa80058a9e10}

*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
Probably caused by : yk62x64.sys


DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80062ac060, Physical Device Object of the stack
Arg3: fffff80000b9c518, Functional Device Object of the stack
Arg4: fffffa80058a9e10, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE:  3

IRP_ADDRESS:  fffffa80058a9e10

DEVICE_OBJECT: fffffa8006c34050

DRIVER_OBJECT: fffffa8006c01060

IMAGE_NAME:  yk62x64.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ac07193

MODULE_NAME: yk62x64

FAULTING_MODULE: fffff88005141000 yk62x64

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x9F

PROCESS_NAME:  System

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from fffff80002aed273 to fffff80002a7e740

STACK_TEXT:  
fffff800`00b9c4c8 fffff800`02aed273 : 00000000`0000009f 00000000`00000003 fffffa80`062ac060 fffff800`00b9c518 : nt!KeBugCheckEx
fffff800`00b9c4d0 fffff800`02a8a29e : fffff800`00b9c600 fffff800`00b9c600 00000000`00000002 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x292b0
fffff800`00b9c570 fffff800`02a89dd6 : fffffa80`08ae4168 fffffa80`08ae4168 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x66
fffff800`00b9c5e0 fffff800`02a8a4be : 00000147`cc7a4d90 fffff800`00b9cc58 00000000`0089b54d fffff800`02bfbc28 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9cc30 fffff800`02a89cb7 : 00000079`a4ef72c4 00000079`0089b54d 00000079`a4ef7260 00000000`0000004d : nt!KiTimerExpiration+0x1be
fffff800`00b9ccd0 fffff800`02a86eea : fffff800`02bf8e80 fffff800`02c06c40 00000000`00000000 fffff880`010c94c0 : nt!KiRetireDpcList+0x277
fffff800`00b9cd80 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9cd40 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

FAILURE_BUCKET_ID:  X64_0x9F_IMAGE_yk62x64.sys

BUCKET_ID:  X64_0x9F_IMAGE_yk62x64.sys

Followup: MachineOwner
---------

 

[elyk371]

Thank you. I've updated the driver and the problem has seemed to been fixed. I put my computer into sleep mode last night and was able to resume normally. Thanks again.