BSOD During startup

[TekF5ve]

Noticed my CPU was running hot. I disables TurboCore in the BIOS. Blue screens even after enabling it again. most recent 3 or 4.

 

[TekF5ve]

bump

 

[Dave76]

How hot?

Use this link and fill out your System Specs.
Speccy Free System information Utility

Use Core Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Last two recent crashes:

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Invalid system memory was referenced.
Could not read faulting driver name
PROCESS_NAME:  WmiPrvSE.exe
FAILURE_BUCKET_ID:  X64_0x50_BAD_IP_nt!_??_::FNODOBFM::_string_+43d86
--------------------------------------------------------------------------------------------------------------------------------------------
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes:  Device driver, Hardware (Memory in particular)
A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
IMAGE_NAME:  memory_corruption
MEMORY_CORRUPTOR:  ONE_BIT
FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

This might be caused by the CPU overheating and throttling causing the memory to have an error.

First thing to do is make sure the CPU is not overheating.
Do not do any further testing unless the CPU is running at safe temps.

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.

Run memtest86+ for 7 full passes, with all RAM cards installed.
Best to run overnight as depending on the amount of RAM you have may take several hours.
If you get any errors you can stop the test.
RAM - Test with Memtest86+

From your App Event Log.
42,702 of these Warnings.

Event[42702]:
  Log Name: Application
  Source: NVIDIA OpenGL Driver
  Date: 2012-09-14T16:00:43.000
  Event ID: 2
  Task: N/A
  Level: [COLOR="Red"]Warning[/COLOR]
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: KKnutson-PC
  Description: 
The NVIDIA OpenGL driver has encountered
an out of memory error. This application might
behave inconsistently and fail.

Update the nVidia graphics driver.

 

[TekF5ve]

MY blue screens seem to be better after restoring my bios to deafult settings. what is the danger zone for my CPU?
AMD
FX-8120
Zambezi 32nm Technology

 

[TekF5ve]

CPUZ Requested Pics

 

[TekF5ve]

CPU 1.380V
DRAM 1.653V

Couldn't find CPU Integrated Memory in my BIOS


and my CPU is running 60-65 playing borderlands 2, but idle its around 30-40

 

[Dave76]

Those temps are high, AMD usually run cool. I have seen many running stress tests at 50°C or below.
Are you using the stock CPU cooler?

Max CPU temp is 61°C, add 5°C for the core temp max core temp is 66°C.
AMD FX-8120 Product Details

Were you OC'ing the CPU and RAM?

Post the full crash reports if your have another crash.

 

[TekF5ve]

it only happens during borderlands. i am using the stock cooler. i have a hyper 212 EVO.

what can i do to cool it?
clear my case?
reseat the cpu?
change the fan?
more fans?

my cable management is noexistent, will arranging wires help at all, or is this all the fans/thermal paste?

 

[TekF5ve]

also i dont overclock at all. playing any games it usually gets to maybe 55, just borderlands 2 spikes up this high. i got warning from AI Suite Thermal watch and shut my computer down.

 

[TekF5ve]

These are my temps with WOW running. Should i be looking at core temps or the cpu temp?

 

[Dave76]

Remove your CPU cooler, remove the thermal paste and clean the CPU and cooler with isopropyl alcohol, apply new thermal paste and install the Hyper 212 EVO CPU cooler.
Be sure the cooler is tight, if it's loose it will not cool properly.

Make sure the case wires are tucked out of the way so the system gets good airflow.
Always check the CPU core temps.

Your motherboards IMC is CPU/NB voltage.

Let me know what the CPU core temps are after you replace the thermal paste.
If the temps are good, you can run a stability test.

 

[TekF5ve]

ive heard multiple ways to put thermal paste on, ive heard put on a bead of paste and spread it around.
iver heard other says put a rice sized bead on and just put it on and it will work itself around.

i did the spread one

 

[Dave76]

That's the way I do mine, just make sure it's a thin layer, too much can be as bad as too little, the trick is to get the right amount applied.

You should apply the paste, attach the cooler, then remove i the cooler and check if the paste is squeezed out on the sides this means you have too much.

This is a good review: Best Thermal Paste Application Methods

Sorry, should have post the info in the last post.

Check your BIOS for the (IMC) CPU/NB voltage and post it here.

You can test the CPU core temps with your most demanding game or run a stability test.

If you want to stress the system you can run OCCT.
OCCT stability checking tool
Run the CPU:OCCT test for at least 30 minutes, be sure to monitor your CPU and GPU temps, don't let the CPU go over 66°C.
Set the time before you start.
When its done, pass or fail, it will make some graphs. Post these here as they are useful for analyses.

 

[TekF5ve]

Well I installed the hyper 212. Running OCCT at the moment. its been stuck at 57 for a while now.

 

[TekF5ve]

well when the test finished it errored and closed out, it said it saved the results somwhere, but i cant find them. but my cpu averaged 57, would spike 58 if i used chrome and itunes.

 

[TekF5ve]

ok so
IMC (CPU/NB) Volatage
offset mode
Cpu offset 1.380V
cpu/nb offset 1.237V
cpu vdda 2.496V

 

[TekF5ve]

Spoke to soon. Getting a plethora of blue screens. new bsod logs included

 

[Dave76]

For the OCCT graphs look in C drive > Users > (User name) > My Documents > OCCT
Post them here if you can find them.

The CPU temps are a little better, you may have too little or too much thermal paste.

Bump your CPU/NB offset to 1.300V.

Run memtest86+ for 7 full passes, with all RAM cards installed.
Best to run overnight as depending on the amount of RAM you have may take several hours.
If you get any errors you can stop the test.
RAM - Test with Memtest86+
If you get any errors with both RAM cards installed, remove one card and test again.
If you get any errors, swap the cards and test again.

Your last five crashes:

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA 
Usual causes:  Defective hardware (particularly [COLOR="Red"]memory[/COLOR] - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Probably caused by : [COLOR="red"]hardware [/COLOR]
Could not read faulting driver name
IMAGE_NAME:  hardware
FAILURE_BUCKET_ID:  X64_IP_MISALIGNED
--------------------------------------------------------------------------------------------------------------------------------------------
Two of these.
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes:  Device driver, Breakpoint set with no debugger attached, Hardware ([COLOR="red"]Memory[/COLOR] in particular)
Probably caused by : [COLOR="red"]memory_corruption[/COLOR]
IMAGE_NAME:  memory_corruption
FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT
--------------------------------------------------------------------------------------------------------------------------------------------
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes:  Device driver, [COLOR="red"]memory[/COLOR], kernel
PROCESS_NAME:  MsMpEng.exe
FAILURE_BUCKET_ID:  X64_0x1a_5002_nt!_??_::FNODOBFM::_string_+464b8
--------------------------------------------------------------------------------------------------------------------------------------------
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes:  System service, Device driver, graphics driver, ?[COLOR="red"]memory[/COLOR]
Probably caused by : memory_corruption
PROCESS_NAME:  MpCmdRun.exe
IMAGE_NAME:  [COLOR="red"]memory_corruption[/COLOR]
FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

 

[TekF5ve]

I'm a very stubborn human. I reseated my RAM, because i saw misaligned in the BSOD files u posted. and i redid my cpu and your right, way to much thermal paste. and no bsod's yet. i leave for vacatrion for 2 days, so i can't run a full memtest in time. but i will do it when i return,

 

[Dave76]

Good work with the CPU cooler and RAM, sometimes re-seating the RAM will give good results.

Enjoy your vacation, let us know the results of memtest86+ when you get back.