Hi andraros,
It appears that your system is having hardware errors, although they are constantly corrected, I would recommend to perform hardware stress tests since it may be a reason why no dump is created.
Please read the instructions carefully, if you have any questions please ask them before performing the test.
Run
Furmark to test your GPU.
Furmark tutorial
Note
Run Furmark for around 30 minutes
Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high
Make a photo of the result and post it.
In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor
- the frequency of the GPU,
- the GPU memory clock,
- the temperature,
- the power,
- the load on the GPU,
- Etc.
I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.
Diagnostics Test
HDD TEST
Note
Please run HDTune first, in the order posted!
Run
HDTune to
- check the health,
- scan for errors, no quick scan but full scan
- run a benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
- the health,
- the error scan,
- the benchmark incl. following
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run
SeaTools DOS to check the integrity of your HDD.
SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.
Note
Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.
Run
chkdsk
Disk Check - Windows 7 Help Forums
Use
option TWO with parameter /r
Upload the chkdsk log :ar:
Check Disk (chkdsk) - Read Event Viewer Log
Run MemTest86+ to analyse your RAM.
MemTest86+ - Test RAM - Windows 7 Forums
Note
MemTest86+ needs to be run for
at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for
zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Run Prime95 to stress test your CPU.
Prime95 - Stress Test Your CPU - Windows 7 Forums
Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.
