BSOD error 0x000000d1

[rpet]

Hello All,

The Dell T1750 workstation is used for process control application. The software is TwinCat PLC v2.11.
First, ethernet communication to I/O device stopped. Then, after attempting to restart PLC software BSOD occurred.

I would appreciate any help to find the reason of the BSOD.

Cheers,
Peter

(See attached SF Diagnostic Tool data.)

 

[Thedoctor44]

You appear to have problems with your TwinCAT-Intel PCI Ethernet Adapter driver. I would highly recommend updating the driver from here. Find your correct Network adapter and install the latest driver.

http://www.intel.com/p/en_US/support/

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {9a5aac90, ff, 0, 9a5aac90}

Unable to load image \SystemRoot\system32\DRIVERS\TCI8254X.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for TCI8254X.sys
*** ERROR: Module load completed but symbols could not be loaded for [COLOR="red"]TCI8254X.sys[/COLOR]
Probably caused by : TcRTime.sys ( TcRTime+4c90 )

9503a000 952ec000   TCI8254X T (no symbols)           
    Loaded symbol image file: TCI8254X.sys
    Image path: \SystemRoot\system32\DRIVERS\TCI8254X.sys
    Image name: TCI8254X.sys
    Timestamp:        [COLOR="Red"]Tue Feb 19 11:52:24 2013[/COLOR] (51236778)
    CheckSum:         0001FAEE
    ImageSize:        002B2000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

 

[rpet]

Thank you for the information. Unfortunately, our 2nd PC just had a similar problem (but error-0x000000CE), which I submitted a new thread.
http://www.sevenforums.com/bsod-help-support/327068-bsod-error-0x000000ce.html
Could you pls check if it has the same reason?
Thank you,
Peter

 

[Thedoctor44]

Has the problem been fixed on this PC? If so please mark the thread as solved.

 

[rpet]

The problem is not fixed yet. The TwinCAT-Intel PCI Ethernet Adapter driver is made by Beckhoff. I contacted Beckhoff support for updated driver.

 

[i4mpi3Rre]

hello rpet, I have the exact same issue as yours. did you solve it?