BSOD Error 50, D1 relating to ntskernal.exe and dxgmms1.sys

[DarinSpeedtech]

I keep getting random BSOD related to ntskernal.exe and dxgmms1.sys mostly while using solidoworks 2015.
Solidworks requires us to us old graphics drivers because of compatability issues so that may the be directx issues but not sure.

Before the BSOD I notice glitches in the software prior to it happening.

Everything I read points to drivers or faulty hardware. The memory has been tested thru windows and memtest86 with no errors.

Windows has had a fresh install and nothing seems to fix the issues we are having with this PC.

Any help would be greatly appreciated.

 

[Laith]

Hiya and welcome to SevenForums!rb:

BugCheck 50, {fffffb800cda61b8, 1, fffff880053cbacf, 7}


Could not read faulting driver name
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_DMA_POOL::AcquireBuffer+73 )

BugCheck 50, {fffff9a00b3129f8, 0, fffff80002c585b6, 5}

Probably caused by : memory_corruption ( nt!MiQueryAddressState+1d6 )

BugCheck A, {fffffb800d21ddf0, 2, 1, fffff80002c91629}

Probably caused by : ntkrnlmp.exe ( nt!KiProcessExpiredTimerList+129 )

Run MemTest86+, It must be MemTest86+. http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Update your DirectX drivers.