Solved Random BSOD ntoskrnl.exe and dxgmms1.sys

[bRAM4054]

Hello all,

I have had this issue on-and-off for roughly 4 months now; it is not bricking my system just seems to happen every-other log on (usually my first log-in)

My futile attempts of fixing this issue has resulted in purchasing new memory, a new graphics card, a new PSU and finally a new USB wi-fi dongle (have not received yet)

I have tried countless programs CCleaner, Blue screen view, tweaking.com, memtest, even a fresh install (twice). I do dabble in computer maintenance but this has been the first time I have been lost for solutions.


This is my first time, so If you need any further info just let me know.

Thanks in advance

 

[bRAM4054]

I have also attached a sceenshot from the blue screen viewer

 

[bRAM4054]

Bump

 

[Gknrsy]

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffffa8043819010, 0, fffff8000353f596, 5}

Could not read faulting driver name
Probably caused by : memory_corruption
Followup: memory_corruption
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa8043819010, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8000353f596, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)
Debugging Details:
------------------

Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034ae100
fffffa8043819010
FAULTING_IP:
nt!CmpParseKey+26
fffff800`0353f596 41388000000033 cmp byte ptr [r8+33000000h],al
MM_INTERNAL_CODE: 5
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: CODE_CORRUPTION
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff880026d7e90 -- (.trap 0xfffff880026d7e90)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffff880026d81b8
rdx=fffffa800cd04500 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000353f596 rsp=fffff880026d8020 rbp=7ffffa80108191c8
r8=fffffa8010819010 r9=fffff8a003eef200 r10=fffff8a00001aca0
r11=fffff8a003eef262 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!CmpParseKey+0x26:
fffff800`0353f596 41388000000033 cmp byte ptr [r8+33000000h],al ds:80e0:fffffa80`43819010=??
Resetting default scope
LOCK_ADDRESS: fffff8000347abe0 -- (!locks fffff8000347abe0)
Resource @ nt!PiEngineLock (0xfffff8000347abe0) Available
WARNING: SystemResourcesList->Flink chain invalid. Resource may be corrupted, or already deleted.

WARNING: SystemResourcesList->Blink chain invalid. Resource may be corrupted, or already deleted.
1 total locks
PNP_TRIAGE:
Lock address : 0xfffff8000347abe0
Thread Count : 0
Thread address: 0x0000000000000000
Thread wait : 0x0
LAST_CONTROL_TRANSFER: from fffff800032f35b3 to fffff80003276bc0
STACK_TEXT:
fffff880`026d7d28 fffff800`032f35b3 : 00000000`00000050 fffffa80`43819010 00000000`00000000 fffff880`026d7e90 : nt!KeBugCheckEx
fffff880`026d7d30 fffff800`03274cee : 00000000`00000000 fffffa80`43819010 fffff8a0`02e49900 fffffa80`0cd04500 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`026d7e90 fffff800`0353f596 : fffff8a0`02e49990 fffff880`026d8130 fffff8a0`80000258 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`026d8020 fffff800`03571db8 : fffffa80`108191c8 fffff800`03201000 fffff8a0`0001ac70 fffff800`00000001 : nt!CmpParseKey+0x26
fffff880`026d8320 fffff800`03572fd6 : 00000000`00000000 fffffa80`10819010 00000000`00000000 fffffa80`0cd04500 : nt!ObpLookupObjectName+0x588
fffff880`026d8410 fffff800`03529818 : fffff880`02f64180 00000000`00000000 00000000`00000000 fffff880`026d85e8 : nt!ObOpenObjectByName+0x306
fffff880`026d84e0 fffff800`0352a0b6 : fffff880`026d88f8 fffff880`000f003f fffff880`026d8910 fffff800`034b1600 : nt!CmCreateKey+0x2e1
fffff880`026d8650 fffff800`03275e53 : ffffffff`ffffffff 00000000`00000000 fffff6fc`5001e000 fffff800`03298c98 : nt!NtCreateKey+0x2e
fffff880`026d86a0 fffff800`03272410 : fffff800`034e72b2 00000000`00000001 20207050`03230858 00000000`000000b5 : nt!KiSystemServiceCopyEnd+0x13
fffff880`026d88a8 fffff800`034e72b2 : 00000000`00000001 20207050`03230858 00000000`000000b5 fffff880`026d8b20 : nt!KiServiceLinkage
fffff880`026d88b0 fffff800`034e3f12 : 00000000`00000001 00000000`00000002 00000000`00000002 00000000`000f003f : nt!IopCreateRegistryKeyEx+0x7e
fffff880`026d8980 fffff800`034e48d5 : 00000000`00000002 00000000`00000000 fffff880`026d8b80 00000000`00000001 : nt!IopGetDeviceInterfaces+0x146
fffff880`026d8af0 fffff800`034e3bb5 : 00000000`00000002 00000000`00000000 00000000`00000000 fffff8a0`01dfe900 : nt!PiGetInterfaceDeviceList+0x41
fffff880`026d8b50 fffff800`03539c94 : fffff8a0`01dfe900 fffff800`00008000 fffff880`026d8c01 fffff800`03744da0 : nt!PiControlGetInterfaceDeviceList+0x111
fffff880`026d8bd0 fffff800`03275e53 : fffffa80`0f3b1910 00000000`003beb70 fffff880`026d8ca0 00000000`003bebf8 : nt!NtPlugPlayControl+0x100
fffff880`026d8c20 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13

STACK_COMMAND: kb
CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff8000353f597 - nt!CmpParseKey+27
[ b8:38 ]
1 error : !nt (fffff8000353f597)
MODULE_NAME: memory_corruption
IMAGE_NAME: memory_corruption
FOLLOWUP_NAME: memory_corruption
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MEMORY_CORRUPTOR: ONE_BIT
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT
BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT
Followup: memory_corruption
---------


it's look like memory problem.
First try http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html
and than ,
This Memory Diagnostics all over night wait until 10-12 pass

 

[bRAM4054]

Hi,
Tried the furmark and 10mins in, BSOD. Please find attached...

 

[bRAM4054]

And one more from luck... dump after running prime95

 

[Gknrsy]

Try ,

1 - Download Update for Windows 7 for x64-based Systems (KB974431) from Official Microsoft Download Center
2 - Update video card driver
3 - Reinstall ( Update ) Directx

After please run furmark again

 

[bRAM4054]

Just downloading AMDcleanup utility with intentions of installing latest driver. But I have completed the other steps and no change...

 

[bRAM4054]

None of the previous solutions worked, end memtest came back okay.

My last ditch effort seems to of done the trick though (fingers crossed)... I removed the zalman CPU cooler, good clean-out and re-applied a new layer of thermal paste. Installed the cpu and cooler and thus far no BSOD.

I'll give a day or so before I close the thread; and thanks Gknrsy