BSOD everytime boot into window 7 on Dell Studio XPS

[kunoyu]

hi there,
I just received an old Studio XPS. It ran fine until the start of this week, when I was watching an online video, it just crashed. I tried to restart, force power off completely and re-turn on to no available, everytime, a blue screen came up say something fault with the display...
So then, I tried to boot into safemode instead, and it was fine(i'm using it right now, still in safemode though), but not it the normal window booting.
I tried to update the latest driver from ATI 4650, but I don't know, it can't be installed under safemode. Please help

the laptop is running Windows 7 Professional 32bit

 

[yowanvista]

Your Broadcom NetLink (TM) Gigabit Ethernet NDIS6.x Unified Driver is the cause
Update it Dell - Drivers and Downloads
Note that old models no longer receive new updates

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 00000005, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 9524c56d, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from 82da9718
Unable to read MiSystemVaType memory at 82d89160
 00000005 

CURRENT_IRQL:  2

FAULTING_IP: 
k57nd60x+2856d
9524c56d 8a08            mov     cl,byte ptr [eax]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  807e0ae8 -- (.trap 0xffffffff807e0ae8)
ErrCode = 00000000
eax=00000005 ebx=87d21000 ecx=0000000b edx=000001ff esi=87fd9000 edi=00000001
eip=9524c56d esp=807e0b5c ebp=807e0bc0 iopl=0         nv up ei pl zr na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
k57nd60x+0x2856d:
9524c56d 8a08            mov     cl,byte ptr [eax]          ds:0023:00000005=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from 9524c56d to 82c8782b

STACK_TEXT:  
807e0ae8 9524c56d badb0d00 000001ff 807c4120 nt!KiTrap0E+0x2cf
WARNING: Stack unwind information not available. Following frames may be wrong.
807e0bc0 95226cef 00000000 00000001 00000000 k57nd60x+0x2856d
807e0be4 95226f56 00000000 867da0e0 853c3ca8 k57nd60x+0x2cef
807e0bf8 952270fb 87d21000 00000000 807e0c40 k57nd60x+0x2f56
807e0c10 8b280301 87d21000 00000000 00000000 k57nd60x+0x30fb
807e0c50 8b22b9f4 853c3d9c 003c3ca8 00000000 ndis!ndisMiniportDpc+0xda
807e0c78 82ca93b5 853c3d9c 853c3ca8 00000000 ndis!ndisInterruptDpc+0xaf
807e0cd4 82ca9218 807c4120 807c9800 00000000 nt!KiExecuteAllDpcs+0xf9
807e0d20 82ca9038 00000000 0000000e 2d58654b nt!KiRetireDpcList+0xd5
807e0d24 00000000 0000000e 2d58654b 3a69524e nt!KiIdleLoop+0x38


STACK_COMMAND:  kb

FOLLOWUP_IP: 
k57nd60x+2856d
9524c56d 8a08            mov     cl,byte ptr [eax]

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  k57nd60x+2856d

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: k57nd60x

IMAGE_NAME:  k57nd60x.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  49f44427

FAILURE_BUCKET_ID:  0xD1_k57nd60x+2856d

BUCKET_ID:  0xD1_k57nd60x+2856d

Followup: MachineOwner
---------