Solved BSOD from Elder Scrolls Skyrim memory management

[feelingstupid]

I'm lead to believe memory management is due to RAM, however it was taken to a shop to be repaired. I was told the problem was RAM and he had replaced it but still problems persist. I can load Skyrim and play it quite well on all settings of graphics but eventually it either just freezes or on some occasions I get BSOD, not always the same message in the BSOD though.

 

[HarriePateman]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

[COLOR="Red"]MEMORY_MANAGEMENT (1a)[/COLOR]
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
	contains the address of the PFN for the corrupted page table page.
	On a 32 bit OS, parameter 2 contains a pointer to the number of used
	PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa80062ade30
Arg3: 000000000000ffff
Arg4: 0000000000000000

Your right it most probably cause by your RAM.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[feelingstupid]

Well I THINK it's a ram issue because after 12 passes on memtest it gave an error with both ram sticks in, however when testing them individually I received no errors for the one stick of ram in both slots for 9 passes in the one slot and about 4 or 5 passes in the other slot. Did about 4 to 5 passes with the other stick but only in the one slot because I was missing Skyrim to much lol.