Solved Bsod id2057

[HDwire]

Hi All
Just built a Windows 7 Professional on a custom build in the last 24 hrs
Did a memtest86 its clear
Crashes becoming sooner and sooner.
Garbled Graphics at BIOS POST (not every time)

Dud graphics card or not? or Drivers haven't a clue!

DMP Files uploaded
Appriecate any help fellas

 

[HDwire]

Got the msinfo32 file too. Do BSODs usually happen in safe mode?
Am selling this pc and will be only used for accounts sage program.
just need the shutdowns sorted.

 

[HDwire]

Seems to be very stable in safe mode....can it still be a hardware issue?
got the SF diags grab all for you need to get this computer out tomorrow.
good forum here!
btw its a totally clean system just with sage installed performance is great just BSOD thinking of over clocking it by 400 mhz...
any help would be great guys!

 

[HDwire]

updated nvidia drivers it lasted longer , BSOD while installing msoffice 2003.
BSOD BAD_POOL_HEADER

 

[HDwire]

New DMP file , Please disregard the the older ones. I won't make any more changes until this one is looked at ... Please helppppp!

 

[HDwire]

can anyone help??? i know i keep asking tried to workout the debug myself but am not good with it.

 

[HDwire]

BSOD - shuts down if in use

need this computer in by this afternoon would love the help this morning in finding out whats wrong with it.
Memtest ran again. no problems. although there is mismatched memory

can someone please read my dmp files?

 

[koolkat77]

Did you make sure all the parts are compatible with each other? Are you using any old hardware on this new built PC?

 

[HDwire]

thanks for replying koolkat77
the computer build isn't exactly new most of the hardware dates back to 06/07

2 things are relatively new is SATA 1TB HDD and dvdwriter (IDE)

memory at 2.5gb but mismatched bus speeds. memtest shows clear though? would that still effect it.

I do worry about the Graphics card as It showed 2 garbled lines at bios post..? its stopped now though it may come back? i Haven't got enough hardware for trial and error

What the dmp file say?

 

[koolkat77]

Try adjusting the bus speeds of the RAM.

Update the video drivers:

Driver	c:\windows\system32\drivers\nvlddmkm.sys (8.15.11.8593, 9.40 MB (9,853,248 bytes), 13/07/2009 23:09)

• NVIDIA Driver Downloads - Automatically Detect NVIDIA Products

(Needs Java to run)

For monitoring the heat/celsius of the system, use Speccy or HWinfo:

• Speccy - System Information - Free Download
• CPUID - System & hardware benchmark, monitoring, reporting

 

[HDwire]

ok the video driver has been updated to its latest
all memory banks bumped up to ddr400 as it was mismatched with ddr333

just a question this graphics card is geforce 8300 gs at 128mb pretty low.
it is running windows aero quite well.

going to put pressure on cpu with an office install as it crashed the last time will let you know how it gets on and get back to you with a new DMP file.

 

[HDwire]

another bsod got another dmp file for you i do appreciate any help!

what I've noticed is a slight drop mouse smoothness like a lapse then i turned aero off.

it went much faster but crashed when i switched it back to aero again.
I think the graphics card isn't a good one.....

BSOD seems to look different too,,,,

 

[HDwire]

stop errors in BSOD now. don't know what to do...

 

[koolkat77]

Need the files from the posting instructions.

 

[HDwire]

tried memtest86 for a few passes found errors from one of the memory sticks.

memory was mismatched anyway ddr333 to ddr400 so got another 1gb ddr400

no bsods since

graphics card is fine.

I seldom come across bsod and it is mostly hardware issues,!!!

thanks for the help koolkat77

 

[koolkat77]

Thanks for letting us know your fix.