Solved BSOD in idle, not able to get logs

[CA3D0]

Hello,

for some time now my pc started getting random BDOD's in idle, or under low load like watching youtube videos
I tried running the jcgriff2.exe but it doesn't output any files for me?!

some info:
windows 7 home x64 sb version
self installed about 1 year ago
the hardware is ~2 years old, recently updated my gpu (if you want some more specs I can post them)
I have the minidump and the system health report attached to this post

Thank you for trying to help me
CA3D0

 

[writhziden]

ASACPI.sys Sun Mar 27 20:30:36 [B][COLOR="Red"]2005[/COLOR][/B] (42476C4C)

Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:

1. Going to the Asus motherboard support site
   When you reach the website:
2. Scroll down the page and click Utilities
3. Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
4. Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
5. Download and install the driver.
6. After installation is complete, verify that it installed correctly.
   • Click Start Menu
   • Click My Computer
   • Go to C:\WIndows\System32\drivers\
   • Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)

Your crash was DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.

• If you are overclocking any hardware, please stop.
  
  
• Check Windows for corruption. Run http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to provide us with the sfcdetails.txt file if errors occur.

Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.

1. Download the drivers you want for your display card(s)
2. Click Start Menu
3. Click Control Panel
4. Click Uninstall a program
5. For AMD:
   • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
   • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):
     1. Click Start Menu
     2. Right Click My Computer/Computer
     3. Click Manage
     4. Click Device Manager from the list on the left
     5. Expand Display adapters
     6. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
     Alternatively:
     1. Login as an adminstrative user
     2. Click Start Menu
     3. Click Control Panel
     4. Click Hardware and Sound
     5. Click Device Manager (the last link under Devices and Printers)
     6. Expand Display adapters
     7. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
6. Restart your computer after uninstalling drivers for all display cards
7. Install the driver you selected for the display cards once Windows starts

Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!

Your crash was also a 0x116 Video TDR Error crash:

• 
  

  These are all stop 0x116 VIDEO_TDR_FAILURE conditions.
  
  It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.
  
  Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.
  
  If playing with video driver versions hasn't helped, make sure the box is not overheating. Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU. Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference. If so, it might be as simple as dust buildup and subsequently inadequate cooling.

  
  The above quote was taken from http://www.sevenforums.com/crashes-debugging/25912-bsod.html#post280172, which is linked to in usasma's thread about this error. Closely follow the first three posts of usasma's thread outlining http://www.sevenforums.com/crash-lo...op-0x116-video_tdr_error-troubleshooting.html and proceed through each step. Let us know if you need further help.

 

[CA3D0]

I updated the ASACPI.SYS file and all amd drivers and ran sfc which gave me no errors, I hope it works now

BTW I am sure the hardware is not overheating in idle, and I thought overclocking didn't change the idle stability of a system at all, it only affects load clocks/voltage?!

 

[writhziden]

Overclocking can affect how the system idles if the voltages are not correctly applied.

Let us know whether you need further help. Otherwise, post back in a few days how the system is responding.

 

[CA3D0]

everything seems to work perfectly now, thank you very much for your help

 

[writhziden]

You're welcome. When you are confident it is solved, please let us know and also mark the thread solved.