BSOD Installation Error 0x0000007B Dual Boot System

Alpha90

New member
Local time
1:58 AM
Messages
49
I do not know if this is the correct forum to ask this question but im currently trying to jury rig a dual boot system of windows 7 and windows XP from a Win 7 / Vista dual boot system. I have been unable to hinder the OS executable compatibility error for installing older operating systems over "current" operating systems so any in windows route i take to install win XP on a separate hard drive is stopped.

After several attempts of what i mentioned in paragraph one i tried the basic bios load from CD. The end result was a 0x0000007B BSOD. I consulted the fountain of all knowledge formerly known as Google and discovered what a 0x0000007B could possibly mean and i used the drive fitness test provided by my hard drive manufacturer and windows chkdsk and the drive checked out fine. My next step was modifying BIOS setting that dealt with the sata configuration. I changed from raid (which was pointless to be on anyway since i do not have a raid array) to ACHI even IDE although im not sure what the IDE configuration for SATA really meant but i did it anyways. Each time i got the BSOD error at the exact spot...
I just don’t know what to do to fix my problem and dual boot win XP alongside my win 7 boot.

Also important information to note, Vista installed perfectly on the drive i was trying to install XP on and the drive is in an Esata external enclosure
 

My Computer

Computer Manufacturer/Model Number
Personally Built
OS
Windows 7 Professional x64
CPU
i7 2600k
Motherboard
P8z68-VLe Asus
Memory
4gb DDR3 x4 Dimms
Graphics Card(s)
MSI Radeon 6950
Sound Card
Asus Xonar DS
Monitor(s) Displays
Flatron D2342
Screen Resolution
1920 x 1080
Hard Drives
Hatachi 2TB Sata 3.0
PSU
Antec 1200 Gold
Case
NZXT Phantom
Cooling
Corsair H100 Cooling System
Keyboard
Logitech G11
Mouse
Logitech G5
Internet Speed
25MBPS to the router modem
Other Info
500W Logitech Speakers, Wacom Tablet, HP WebCam, KWorld PC150-U TV tuner, HP4050 Printer, Brothers MFC-415 All in one, Floppy Drive
Make sure you have XP SP3 installer - if not find one online for your version (retail/OEM).

For separate HD's unplug all but target HD, wipe the HD using Diskpart Clean Command
then try install. If it fails again you'll likely need the SATA drivers added:
SATA Drivers - Load in Windows XP Setup on Dual Boot
SATA Drivers - Slipstream into Windows XP CD

I would try the AHCI drivers first if you have your BIOS set to that since changing back to IDE may cause Win7 to fail to boot.

After install, plug back in other HD's, set preferred OS HD first to boot in BIOS, then boot other OS HD using one-time BIOS Boot Menu key at boot. This keeps the HD's independent to come and go as you please and minimizes interference from XP. However if this is not convenient for you after trying it for awhile, you can install EasyBCD 2.02 to Win7 to Add XP to a windows-managed Dual Boot menu.
 
Back
Top