Solved Bsod IRQL_NOT_LESS_OR_EQUAL Bug Check Code : 0x0000000a

[Dave76]

With 16GB RAM you may need to make some adjustments.

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Have you been checking your temperatures?
Use Real Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
This is important in order to make RAM settings adjustments.

 

[Moteo]

Hello dave i took the screen shots from cpu z i will upload them now!no i havent tried reinstalling the game it seems to be the only one it has a prob as i am able to play deus ex an mw3 dead island pretty strange!! i will go get the voltages now!

 

[Moteo]

i think this was what u were looking for in the bios

 

[Dave76]

Go to your motherboard manual: Asus p8p67 pro rev 3.1
Manual Pg 3-7
Ai Tweaker first page, scroll down.

CPU Voltage
DRAM voltage
IMC (CPU Integrated Memory Controller) is VCCIO Voltage

Post the voltage settings.

Then we can set RAM frequency, timings and voltages.

 

[Moteo]

Hopefully this it dave...sorry am noob when it comes to these things thanks for your time

Dram-1.503v set to 1.50000
vccsa-0.925v set to auto
vccio-1.053v set to auto
cpu pll-1.787 set to auto
pch-1.056 set to auto
cpu-1.190 set to offset mode

 

[Dave76]

Did you change your HDD?
Or get it to pass the Hitachi Drive Fitness Test?

You need to bump the IMC (CPU Integrated Memory Controller) which is called the VCCIO Voltage to 1.150v.
Bump the DRAM voltage to 1.550v.
Then on the Exit page - Save Changes & Reset.

 

[Moteo]

ok dave will do that i changed my hard drive am using a mates one for the time being it worked fine for him!! waiting to get the replacement parts from the company!! if i change those setting wat will happen??

 

[Dave76]

Most OS default or 'Auto' settings are for 4GB RAM or less, when you add any more RAM the settings are usually not enough to let the system run stable.
Changing the IMC and DRAM voltage gives more power to the RAM cards and will allow them to run stable.
These settings are not near the recommended maximum voltage settings for your system.

Let us know how your system is running.

 

[Moteo]

Will do dave an thanks for the help.....well i reinstalled the game again an this time no prob at all...even watched a video an got no blue screen...i will keep testin for the next few days an see wat happens....i will fill u in : )

 

[Dave76]

Glad to hear your system is running stable.

Let us know if you get any more crashes.
Let us know if your system is still stable after 7 days, so you can mark this thread 'Solved', this information may help others with similar issues.

 

[Moteo]

well its not solved just turned the computer on....an bam as sooon as it longed in....blue screen...this is so flippin annoying!!! so 9if anyone can help it wud be apperciated : )

 

[writhziden]

Try bumping VCCIO to 1.2 V and see how it goes for a while.

 

[Dave76]

Let's lock down some of the RAM timings, this will help with stability.

Manually set your first four RAM timings to 9-9-9-24, leave the rest on 'Auto', and the Command Rate to 2T.
Bump the (IMC - CPU Integrated Memory Controller) VCCIO Voltage to 1.200v.
Bump the DRAM voltage to 1.600v.
Then on the Exit page - Save Changes & Reset.

Test for stability.
Run memtest86+ for at least 7 full passes with all four RAM cards installed, best to run overnight.
For reference: RAM - Test with Memtest86+

If this doesn't work then you can remove two RAM cards, for testing, and check the stability with this configuration.
This will help us to find out if the RAM is causing these issues.

 

[Moteo]

Ok guys i will give it a shot an let u know how it goes......thanks

 

[Dave76]

Let us know the settings you changed, confirmation, and of coarse if it's stable.

 

[Dave76]

Hi Moteo, just wondering if your system is running stable and if it is what was the solution.

 

[Moteo]

Yeah well it seems to be running now til a sec ago the dispaly adapter stopped working sumthing about the kernel but it recovered....so other than that i think it was bumping the voltage up on the ram again dave.....sorry text bak now but i just wanted to be sure it was working u know...especially since it seems to been working fine last time an than it went again.....but i think the solution was bumpin g up the power supplied to the ram tanks for all ur help guys!!!

 

[writhziden]

You're welcome. Glad it is more stable.

 

[Cball444]

Can someone help me with this. This is something that happens to me. And it will happen for like an hour then stop for a couple of days and happen again.

 

[writhziden]

Cball444, I am in the process of analyzing your crash reports as we speak. I will post back the analysis in your thread: http://www.sevenforums.com/crashes-...puter-stuff-can-someone-help.html#post1828009