Bsod kernel_data_inpage_error (0x0000007a)

[msyafiq]

Hi,

I've been experiencing BSOD KERNEL_DATA_INPAGE_ERROR 0x0000007A in my laptop a few hours ago. After the BSOD occurred, the BSOD did not automatically restart my laptop. I had to unplug and restart the computer. After that, the computer run start up repair and restart the computer but the computer did not display anything, only black screen. Then, I have to unplug again the computer until it can start normally. Attached is the data obtained from the dm log collector.

Thank you.

 

[axe0]

Please run the dm log collector again and upload the new zip.
There are several files missing.

 

[msyafiq]

I just received the same bluescreen recently. Attached is the new dm log collector. Thank you for your reply.

 

[axe0]

Unfortunately there are still many files missing including dumps.

Please run the dm log collector again and upload a new zip, you don't have to wait for another bluescreen.

 

[msyafiq]

When copying the mini-dump files the DM collector showed 'The system cannot find the file specified.'.
Is this due to my 'Write debugging information' at 'Startup and Recovery' was set as 'Kernel memory dump' instead of 'Small memory dump'?

 

[axe0]

It means there are no dump files present at the minidump location, this is caused by moving the dumps and clearing the system (Ccleaner)

 

[msyafiq]

i don't have ccleaner and I didn't move the dumps. Is there any way to re-enable the dumps? Thank you.

 

[axe0]

Please check following location for any files
C:\Windows\Minidump\

To configure dumps: http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

 

[msyafiq]

No files inside mini-dump folder. The dumps was configured to be Kernel Memory Dump before. I've just changed it to Small Memory Dump. All the System Failure options under Startup and Recovery were already ticked.

 

[axe0]

Have you cleaned your system with utilities like Ccleaner, disk cleanup or something?

Then it is waiting for another crash.