Solved BSOD KERNEL_DATA_INPAGE_ERROR suspect revodrive

[dogga]

Hi,

I havent got a clue about BSOD's but I hope you can confirm my suspicion that my revodrive 3 2x is playing up.

I already RMA'd my ram assuming ram was the issue - problem persists daily appreciate any help

 

[koolkat77]

Welcome to SevenForums

If you are overclocking any hardware, STOP. Reset any changed values back to default.

DISK_HARDWARE_ERROR: There was error with disk hardware

Model	ST3120827AS ATA Device
Model	ATA OCZ-REVODRIVE3 SCSI Disk Device

Follow this:

If you have an SSD, make sure the following are up to date:

• SSD firmware
• BIOS Version
• Chipset Drivers
• Hard disk controller drivers/SATA drivers
• If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Start Menu\Programs\Symantec Endpoint Protection	Public:Start Menu\Programs\Symantec Endpoint Protection	Public

Please remove Norton/Symantec. Norton tends to cause BSOD-s and causes several other issues. I would recommend uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials To Test.

• Norton Removal Tool
• Symantec Removal Tool
  

Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-

• Microsoft Security Essentials - Free Antivirus for Windows
  • Malwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computer
    • http://www.sevenforums.com/system-security/206705-good-free-system-security-combination.html
    • How to Scan Your Computer With Multiple Antivirus Programs - How-To Geek

   Warning

:ar: Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check:

1. Click on the start rb:
2. Type CMD on Search
3. Left click and Run as Administrator
4. Type SFC /scannow

Full tutorial here:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Disk Check on your hard drive for file system errors and bad sectors on it:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Reduce items at start-up. Nothing except anti-virus is required plus improves the time for logging in windows.

• http://www.sevenforums.com/tutorials/1401-startup-programs-change.html
• http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html

Let us know the results.

 

[dogga]

nope not over clocking, not even in xmp mode seems like it could be a number of things (suprise suprise!) but the disk hardware comment is where I will start, I saw the red error light flick on the revodrive at the time of the last few BSOD's.

many thanks - after rma if i still get errors i will come back and sift through the rest. thanks again for looking over it

 

[koolkat77]

Let us know how it goes.

 

[dogga]

before i rma'd my revodrive, i saw a post about the revodrives overheating near vid cards. i have an asus p8z77-m micro atx and a fermi gpu so i considered this plausable. very basically i shoved an old fan in the bottom of the case on the revodrive and one month on i have not had one more bsod. many thanks again to the people here for helping.

 

[koolkat77]

Let us know if you still need help.