BSOD: Lots of random crashes (0xc0000005\0x00000000\0x1000008e)

[amraf]

Hello
Thanks for reading this and hopefully pointing me in the right direction
I have attached my:
Mini Dump files
Hijackthis
Driverlist
System info
And a few other useful log files that I have put together that I hope will help

For a Few months now My Computer has been rebooting due to a System error (blue screen of death) At first I was running Windows XP – I ran Memtest and updated all my drivers and ran scandisk everything passed and the updates did not help. I was running out of disk space so this week I bought myself a new 2bt hard disk, when I was in the shop I noticed that they were selling Windows 7 home ultimate at a discount – So I bought it (I had already ran the compatibility tool on my PC so I know the hardware would be supported) only to find that my Blue Screens of death followed me to Windows 7 on my bran new hard drive.
I have read a few posts on the Internet where my error codes point to a bad driver or a memory issue.
So on my new install of Windows 7I have updated all my drivers from the manufactures websites for everything (graphics,Lan,Audio,Motherboard,IDE,etc)
I ran Memtest+86 for 16 hours (allows 6 passes) Memtest did not report any issues with the memory
Even though my Windows 7 install is less than 24hours old I have ran sfc.exe \scannow and ran scandisk to ensure my Hard disk is working ok. I read on another form that Adobe flash player “enable hardware acceleration” could be an issue, so I have disabled it.
There is no logic to when my PC gives a Blue screen, seems random, I could open a document – crash – then the same document will work fine.
I am thinking that's it's got to a hardware issue, but I am not sure what hardware is the issue
Thank you for your time and your help

 

[panais]

Hi.

[FONT=&quot]Download and install [/FONT][FONT=&quot]Driver Sweeper[/FONT][FONT=&quot]

Download the most recent software\driver for your [/FONT][FONT=&quot]NVIDIA [/FONT][FONT=&quot]

Uninstall nvidia software\driver,restart in safe mode,run driver sweeper,choose only NVIDIA-Display and clean,restart in normal mode.

Install the new ati software\driver,restart.

Update [/FONT][FONT=&quot]DirectX [/FONT][FONT=&quot]


Run the [/FONT][FONT=&quot]nvidia-video-card-test[/FONT][FONT=&quot]


Finish with these steps and post back here the results.[/FONT]

 

[amraf]

Hello
Thank you for your help
I have downloaded the latest version of the NVIDIA drivers and I have carried out your instructions
I have the latest DirectX 11 - its not letting me install the latest version
I have also ran the nvidia-video-card-test - and it failed :-( OCCT 4.0.0 -+3.3V
CPU:OCCT- Error Detected - 0h- 1m 12s I have looked at the graphs but not a 100% where the issue is
so I have attached them

 

[panais]

Hello
Thank you for your help
I have downloaded the latest version of the NVIDIA drivers and I have carried out your instructions
I have the latest DirectX 11 - its not letting me install the latest version
I have also ran the nvidia-video-card-test - and it failed :-( OCCT 4.0.0 -+3.3V
CPU:OCCT- Error Detected - 0h- 1m 12s I have looked at the graphs but not a 100% where the issue is
so I have attached them

If you overclock anything stop.

If you cannot run the Occt,then maybe something is wrong with the graphic card.

We need these results from the occt (i added a sample)

 

[amraf]

Hello
Thanks for getting back to me
I do not over clock anything
I have attached the graphs from Occt (they look the same as your sample)

 

[panais]

Hello
Thanks for getting back to me
I do not over clock anything
I have attached the graphs from Occt (they look the same as your sample)

No you didn't.

You uploaded by mistake some personal files,so please remove them and try to upload the OCCT results.

 

[amraf]

Hello
Sorry about that
Please find attached the right files

 

[panais]

No problem

Read first very carefully,then run the stress\test http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

 

[amraf]

stress\test

Hello
I ran the stress\test and it failed
(see below)
[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #1
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 2 21:37] Hardware failure detected, consult stress.txt file.
[Nov 2 21:37] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 2 21:37] Worker stopped.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:39] FATAL ERROR: Rounding was 0.4682617188, expected less than 0.4
[Nov 2 21:39] Hardware failure detected, consult stress.txt file.
[Nov 2 21:39] Torture Test completed 0 tests in 1 minutes - 1 errors, 0 warnings.
[Nov 2 21:39] Worker stopped.

 

[yowanvista]

Hello
I ran the stress\test and it failed
(see below)
[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #1
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 2 21:37] Hardware failure detected, consult stress.txt file.
[Nov 2 21:37] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 2 21:37] Worker stopped.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:39] FATAL ERROR: Rounding was 0.4682617188, expected less than 0.4
[Nov 2 21:39] Hardware failure detected, consult stress.txt file.
[Nov 2 21:39] Torture Test completed 0 tests in 1 minutes - 1 errors, 0 warnings.
[Nov 2 21:39] Worker stopped.

This means that a problem with your CPU, it should be replaced.

 

[panais]

Hello
I ran the stress\test and it failed
(see below)
[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #1
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 2 21:37] Hardware failure detected, consult stress.txt file.
[Nov 2 21:37] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 2 21:37] Worker stopped.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:39] FATAL ERROR: Rounding was 0.4682617188, expected less than 0.4
[Nov 2 21:39] Hardware failure detected, consult stress.txt file.
[Nov 2 21:39] Torture Test completed 0 tests in 1 minutes - 1 errors, 0 warnings.
[Nov 2 21:39] Worker stopped.

This means that a problem with your CPU, it should be replaced.

I agree!