BSOD - minidump - ntoskrnl.exe

[TheFirstJuly]

ok so I've got problems that go back in last two months ... I am getting BSOD and I found out that the problem was with minidump files ( since I don't speak "computer language " forgive me if I say something stupid or incorrect).
With program whocrashed I got that the problem is
crash dump file: C:\Windows\Minidump\081111-13603-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x322493)
Bugcheck code: 0x124 (0x0, 0xFFFFFFFF852DB4DC, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
which is less or more the same answer that computer (windows 7 32-bit ) gave me itself.
But than when I wanted to check the solution he never gave me one ...
this has happen to many times in last two months that I've decided to re-install completely my windows ... today I've got my computer from service center hoping that with reinstalation my problems would be solve but few hours ago it had happened again ...crash out of blue ...and the same note... btw ...serviceman had done some checks on hard disk and it was all clear
there is no dirty in my computer ... afterall I am pharmacist and one more thing ...sorry on my my English since I am not a native speaker ( I don't know computer terms even on my native language )
and here is a file in minidump that gives me a headache ...that was the only file there
any solution? ...if I missed something out there let me know to update

 

[zigzag3143]

ok so I've got problems that go back in last two months ... I am getting BSOD and I found out that the problem was with minidump files ( since I don't speak "computer language " forgive me if I say something stupid or incorrect).
With program whocrashed I got that the problem is
crash dump file: C:\Windows\Minidump\081111-13603-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x322493)
Bugcheck code: 0x124 (0x0, 0xFFFFFFFF852DB4DC, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
which is less or more the same answer that computer (windows 7 32-bit ) gave me itself.
But than when I wanted to check the solution he never gave me one ...
this has happen to many times in last two months that I've decided to re-install completely my windows ... today I've got my computer from service center hoping that with reinstalation my problems would be solve but few hours ago it had happened again ...crash out of blue ...and the same note... btw ...serviceman had done some checks on hard disk and it was all clear
there is no dirty in my computer ... afterall I am pharmacist and one more thing ...sorry on my my English since I am not a native speaker ( I don't know computer terms even on my native language )
and here is a file in minidump that gives me a headache ...that was the only file there
any solution? ...if I missed something out there let me know to update

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html