BSOD Multi browsing, rendering, Gaming, Streaming.

[BBMorti]

I guess the zipped file can answer more than I can..

Windows 7 pro, 64bit
I7 (Never overclocked) System

I multitap with firefox browser.
Not sure what else is relevant.

Feel free to ask for more information.

 

[BBMorti]

Just a small poke.

 

[writhziden]

Crashes point to a problem with DirectX or your graphics card. Could be the drivers are corrupted or the DirectX installation is corrupted.

• Try re-installing DirectX using the Download: DirectX Redist (June 2010) - Microsoft Download Center - Download Details and see how the system responds.
  
  Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
  
  1. Download the drivers you want for your display card(s)
  2. Click Start Menu
  3. Click Control Panel
  4. Click Uninstall a program
  5. For NVIDIA:
     • Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
     • Restart your computer
     • Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
     • If any remain of the above, uninstall one at a time
     • If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed
  6. For AMD:
     • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
     • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers:
       1. Click Start Menu
       2. Right Click My Computer/Computer
       3. Click Manage
       4. Click Device Manager from the list on the left
       5. Expand Display adapters
       6. Do the following for each adapter (in case you have multiple display cards)
          • Right click the adapter
          • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
          • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
          
          Alternatively:
          1. Login as an adminstrative user
          2. Click Start Menu
          3. Click Control Panel
          4. Click Hardware and Sound
          5. Click Device Manager (the last link under Devices and Printers)
          6. Expand Display adapters
          7. Do the following for each adapter (in case you have multiple display cards)
             • Right click the adapter
             • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
             • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
     • Restart your computer after uninstalling drivers for all display cards
     • Install the driver you selected for the display cards once Windows starts

 

[BBMorti]

^
I will do as you suggest, writhziden.

Edit: It is done. Should I try to provoke a blue screen or do my normal routines and await?

 

[writhziden]

Do your normal routines and see if the system runs stable.

 

[BBMorti]

New crashes.. 3 today very shortly after each others while playing diablo 3 and skyping with 3 friends. It is a bit warm in my room.. dont know what else info I can mention.

[FONT=Segoe UI, Arial]On Tue 22-05-2012 15:04:50 your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]atikmdag.sys[/FONT]
Bugcheck code: 0x50 (0xFFFFF10013F82728, 0x1, 0xFFFFF880062919BA, 0x7)
Error: [FONT=Segoe UI, Arial]PAGE_FAULT_IN_NONPAGED_AREA[/FONT]
Dump file: C:\Windows\Minidump\052212-16801-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: C:\Windows\system32\drivers\atikmdag.sys
product: [FONT=Segoe UI, Arial]ATI Radeon Family[/FONT]
company: [FONT=Segoe UI, Arial]Advanced Micro Devices, Inc.[/FONT]
description: ATI Radeon Kernel Mode Driver
[/FONT][FONT=Segoe UI, Arial]
[/FONT]

[FONT=Segoe UI, Arial]On Tue 22-05-2012 15:00:20 your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]ntoskrnl.exe[/FONT]
Bugcheck code: 0x50 (0xFFFFFA9801E85F3B, 0x0, 0xFFFFF80002E835D5, 0x5)
Error: [FONT=Segoe UI, Arial]PAGE_FAULT_IN_NONPAGED_AREA[/FONT]
Dump file: C:\Windows\Minidump\052212-16848-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: C:\Windows\system32\ntoskrnl.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.
[/FONT][FONT=Segoe UI, Arial]
[/FONT]

[FONT=Segoe UI, Arial]On Tue 22-05-2012 14:41:39 your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]dxgmms1.sys[/FONT]
Bugcheck code: 0x50 (0xFFFFF0A00D6D28B0, 0x0, 0xFFFFF8800557CD78, 0x7)
Error: [FONT=Segoe UI, Arial]PAGE_FAULT_IN_NONPAGED_AREA[/FONT]
Dump file: C:\Windows\Minidump\052212-15818-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: C:\Windows\system32\drivers\dxgmms1.sys
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: DirectX Graphics MMS
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.
[/FONT][FONT=Segoe UI, Arial]
[/FONT]

[FONT=Segoe UI, Arial]On Mon 21-05-2012 16:38:31 your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]dxgmms1.sys[/FONT]
Bugcheck code: 0xD1 (0xFFFFFE17F86DC950, 0x8, 0x0, 0xFFFFF88004B9761C)
Error: [FONT=Segoe UI, Arial]DRIVER_IRQL_NOT_LESS_OR_EQUAL[/FONT]
Dump file: C:\Windows\Minidump\052112-15085-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: C:\Windows\system32\drivers\dxgmms1.sys
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: DirectX Graphics MMS
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.
[/FONT]

 

[BBMorti]

I recorded the temperature of the four cores on my i7.. (Never overclocked)

---------Low High
Core #0: 55c 78c
Core #1 52c 76c
Core #2 57c 78c
Core #4 51c 71c

This was tested while having it run in windows browsing and then entering Diablo3..

 

[writhziden]

All DirectX and graphics card related. Since DirectX is built into the OS, check for data corruption.

• If you are overclocking any hardware, please stop.
  
  
• Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using http://www.sevenforums.com/tutorials/96938-check-disk-chkdsk-read-event-viewer-log.html (you may need to search for wininit instead of chkdsk).
  For any drives that do not give the message:
  Windows has checked the file system and found no problems
  run disk check again as above. In other words, if it says:
  Windows has made corrections to the file system
  after running the disk check, run the disk check again.
  
  
• Run the short and long tests with SeaTools for HDDs.
  SeaTools for Windows
  
  SeaTools for DOS​
  
  
• If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.
  
  
• Check Windows for corruption. Run http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to provide us with the sfcdetails.txt file if errors occur.
  
  
• Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the http://www.sevenforums.com/system-s...-system-security-combination.html#post1732627 for better security steps and scanning tools. Make sure to update the security software before running the full scan.
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
     Warning

  Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

 

[BBMorti]

So the temperatures is not the issue? I am no expert but they seem quite high..

 

[writhziden]

They are a bit higher than would be considered safe for stability. Have you checked for dust? What about your heat sink; is it on tight (it should not wiggle at all if you gently nudge it with your finger back and forth)? Was the thermal paste applied properly? Thermal Paste and How To Use It