BSOD - multiple Errors

itauditor

New member
Local time
10:40 AM
Messages
13
The last two were just today were:
Bad_Pool_Header
Page_Fault_in_Nonpaged_area

attached are analysis results:
 
Last edited:

My Computer

Computer Manufacturer/Model Number
none
OS
Windows 7 64 bit Premium
CPU
AMD Phenom X4 945
Motherboard
Gigabyte
Memory
8 GB
Graphics Card(s)
Powercolor HD 5670
Sound Card
mobo
Monitor(s) Displays
na
Hard Drives
Intel SSD 80 GB
PSU
Seasoniic Gold 650
Case
Lian LI
Cooling
Custom
There are no current BSOD reports in the uploaded info. Please do the following:
Upload Dump Files:
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service . I recommend Windows Live SkyDrive - http://skydrive.live.com or another free, file-hosting service. Then post the link to it in your topic so that we can download it.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump

For the older dump files:
Unfortunately, the Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following (this will not affect the analysis of the current files - but it may help later files that are acquired):
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds

So, based on your description, I'd run Driver Verifier according to the instructions (after resetting the system to generate minidumps):
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:
Code:
Delete these registry keys (works in XP, Vista, Win7):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel

More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users

BSOD BUGCHECK SUMMARY
Code:
[font=lucida console]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jul  1 10:03:38.959 2010 (UTC - 4:00)
System Uptime: 0 days 0:09:10.676
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck FE, {8, 6, 6, fffffa800829b000}
Probably caused by : usbhub.sys ( usbhub!UsbhWaitEventWithTimeoutEx+3aa )
BUGCHECK_STR:  0xFE
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jul  1 09:53:18.833 2010 (UTC - 4:00)
System Uptime: 0 days 17:44:49.549
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck 3B, {c0000005, fffff80002ba2121, fffff88005524160, 0}
Probably caused by : ntoskrnl.exe ( nt+385121 )
BUGCHECK_STR:  0x3B
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Jun 30 16:07:18.734 2010 (UTC - 4:00)
System Uptime: 0 days 8:38:38.060
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck 1A, {41201, fffff683ff7ef210, 2d10000214081025, fffffa800956bb10}
Probably caused by : ntoskrnl.exe ( nt+71f00 )
BUGCHECK_STR:  0x1a_41201
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Jun 30 07:27:42.053 2010 (UTC - 4:00)
System Uptime: 0 days 0:43:03.029
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {0, 2, 1, fffff8000268b18c}
Probably caused by : ntoskrnl.exe ( nt+7b18c )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
  
 
 [/font]
 

My Computer

Computer Manufacturer/Model Number
Home built (x64), Lenovo x61s Tablet, Samsung Netbook
OS
Win7 x64 + x86
CPU
Intel i7 920, other Intel chips, and the Atom in the netbook
Motherboard
Asus P6T Deluxe
Memory
12 gB; 4 gB Lenovo; 1 gB Samsung netbook
Graphics Card(s)
ATI 4870
Sound Card
Yes, I have one of these
Monitor(s) Displays
32" Sharp Aquos TV
Screen Resolution
800x600 - I have vision issues
Hard Drives
4 - 150 gB Velociraptors in RAID 5
Promise controller
PSU
1000 watt (can't recall the brand)
Case
Antec 300
Cooling
Big honking cooler that was rated highly at Toms Hardware
Keyboard
Microsoft Natural
Mouse
Logitech Trackman
Internet Speed
Cable
Other Info
GeekSquad UPS
CyberPower UPS
DLink DNS-323 NAS (2 tB)
Netgear wireless router as an access point
Netgear wired router FSV-318
Home network consists of
4 desktop computers (2 Vista, 2 Win7)
1 netbook (Win7)
4 laptop computers (XP, 2-Vista, Win7)
Wii and XBox 360
Back
Top