BSOD new instald windows

[brt]

newly installed windows 7 (ultimate) all updates after i cold not fix previous problem with windows 7 home from BSOD.Now same ting lot of bsod crashes first happened and still happening if i try to create a back up.also if updating win.
attaching rar....
help would be greatly appreciated

 

[zigzag3143]

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP


We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.


You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

 

[brt]

thank for quick answer, att, sys info

 

[brt]

Minidump rar

 

[JMH]

These crashes were caused by memory corruption/exception (`c0000005) (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have Raid update its Driver.



Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html



Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

 

[zigzag3143]

Minidump rar

I note you have verifier enabled. Please turn it off by typing verifier /reset before running memtest.

 

[brt]

memtest86 can drive me insane...(vacuum to clean it out all slots cpu fans etc...)
run Memtest86+ v4.2 i started with all 4 m. and 1 pass then 67 digit errors,i restart it with only 1 channel 1 slot ,pass 7 next different 2 and 4 slot different 2 MB. pass 9,than again slot 1 and 3 with other 2 MB. pass 8. i stapt restart all 4 MB. pass 0 error 3,i re seat all modules error again, something wrong with dual channel memory? all memory are same,i try to seat in different order....will see Any help given will be appreciated.

 

[zigzag3143]

memtest86 can drive me insane...(vacuum to clean it out all slots cpu fans etc...)
run Memtest86+ v4.2 i started with all 4 m. and 1 pass then 67 digit errors,i restart it with only 1 channel 1 slot ,pass 7 next different 2 and 4 slot different 2 MB. pass 9,than again slot 1 and 3 with other 2 MB. pass 8. i stapt restart all 4 MB. pass 0 error 3,i re seat all modules error again, something wrong with dual channel memory? all memory are same,i try to seat in different order....will see Any help given will be appreciated.

Even if all memory is identical, but purchased at a different time, in a different package, they may not match.

It may be a mobo slot.

 

[brt]

test #7,tried 3 times different seating same error on test 7 ,but only if all 4 memory are in,if 1 pair no errors ,tested 1&3 slot pass and 2&4 slot pass bouth pair either way no errors.see att pic.

 

[brt]

now 9 errors if al 4 memory on

 

[zigzag3143]

now 9 errors if al 4 memory on

Since memtest is run outside the windows environment the errors are either bad memory, or perhaps a mobo slot.

9 errors in how many passes?

 

[brt]

#8 passes.why no errors if only 1 pair of memory are in either slot?

 

[zigzag3143]

#8 passes.why no errors if only 1 pair of memory are in either slot?

With 9 errors in the first pass, I would suspect ram, but you need to run them individually to find out which stick, then use a known good stick to test each slot.

 

[brt]

i run individually each memory no errors 7-8 pass i run 1 memory in each slot no error.i run them in pair no errors,and i did with with 3 memory 10 pass no error.how this passable?
when all 4 memory in in first pass 25 errors come up.

 

[zigzag3143]

i run individually each memory no errors 7-8 pass i run 1 memory in each slot no error.i run them in pair no errors,and i did with with 3 memory 10 pass no error.how this passable?
when all 4 memory in in first pass 25 errors come up.

If they work in slots 1-3 in any combination but not in slot 4 it probably is the mobo slot.

 

[brt]

no,all (4) memorys they work in any 3 slot ,but if all 4 slot has memory then are errors at first pass

 

[zigzag3143]

no,all (4) memorys they work in any 3 slot ,but if all 4 slot has memory then are errors at first pass

That seems to indicate slot 4 on the mobo is failing or has failed. Is it under warranty?

 

[brt]

any 3 slot with 3 memory works,only fails (any 4 slot) if all 4 in used ...

 

[zigzag3143]

any 3 slot with 3 memory works,only fails (any 4 slot) if all 4 in used ...

I understood that. I suspect the 4th mobo slot is failing. Is it under warranty?