BSOD - not sure of cause

[AHB]

I built my computer back in January and hadn't had any problems until recently, when I started to get some BSOD, I wasn't sure where they had come from, so I just used my windows image backup I made when I first got my computer and restored to that, this was fine for about a week, but the BSOD is back, not sure of that cause, dumps are attached.

Thanks

 

[Arc]

Welcome aboard.

It is caused by Ralink RT2501/RT2573/T2601/RT2671 Wireless Adapter (you may have a different manufacturer).

BugCheck 10D, {5, 0, 1203, fffffa8008c4b420}

Unable to load image \SystemRoot\system32\DRIVERS\netr7364.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netr7364.sys
*** ERROR: Module load completed but symbols could not be loaded for netr7364.sys
[COLOR=Red]Probably caused by : netr7364.sys[/COLOR] ( netr7364+3a80f )

Followup: MachineOwner
lmvm netr7364
start             end                 module name
fffff880`06a00000 fffff880`06ab9000   netr7364 T (no symbols)           
    Loaded symbol image file: netr7364.sys
    Image path: \SystemRoot\system32\DRIVERS\netr7364.sys
   [COLOR=Red] Image name: netr7364.sys
    Timestamp:        Tue Oct 04 11:44:37 2011[/COLOR] (4E8AA44D)
    CheckSum:         000B6E39
    ImageSize:        000B9000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update it from Ralink-A MEDIATEK COMPANY.

Also, uninstall the following programs,

Start Menu\Programs\Catalyst Control Center
Start Menu\Programs\GIGABYTE\ET6
Start Menu\Programs\GIGABYTE\Smart 6

And Free up the startup.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept the restart.

Let us know the results.

 

[AHB]

Excellent thanks, doing as you instructed now. With regards to uninstalling Catalyst Control Centre, I think that that is my graphics card drivers, maybe I should uninstall them and then install again?

 

[Arc]

Display driver is already installed. IF you remove CCC from control panel, nothing of the display driver will be lost.