BSOD on loadup

[Chiefkeef]

I keep getting BSOD on load up, happens when I get to desktop. Then reboot is fine, any ideas? Thanks guys.

 

[essenbe]

Hello Chiefkeef. I will try to help you if I can. You had 4 dump files. This is what they read.

BugCheck 50, {fffff6a00030b1f8, 0, fffff80001e8cab2, 5}
Could not read faulting driver name
[COLOR=red]Probably caused by : memory_corruption ( nt!MiUpdateWsle+122 )[/COLOR]
Followup: MachineOwner

WHEA_UNCORRECTABLE_ERROR (124)
[COLOR=red]A fatal hardware error has occurred[/COLOR]. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800749a8f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c000001d, fffff8000218617f, fffff8800876ce80, 0}
[COLOR=red]Probably caused by : memory_corruption[/COLOR]
Followup: memory_corruption

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes in one setting or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask​