BSOD on mew install.

[t41310]

I recently re-installed Windows 7 on my pc and have been having BCODS about once a day. I have attached the dump files and would appreciate any help.

 

[Pauly]

Somethings not adding up here, your most recent dump is from a couple weeks ago and your files show a boot time from couple weeks ago also, have you not rebooted your machine in that time ?

Your dump files are reporting a faulting driver but are blaming windows components for the crash
I would starrt by running an SFC scan to check for any file corruption and it may be prudent to run some hardware checks/tests
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html
Hard Drive Diagnostic Procedure
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html
http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

 

[t41310]

I have always have had two hard drives on my pc, a primary and a back-up. My primary hard drive was failing so I decided to purchase a new one and install Windows 7. I started to have BCODs so I used my back-up. Work got very busy so I have not had time to address the issue.

 

[Pauly]

OK well try some of the steps i posted above and come back with your results, any questions and ask away

Given that you have swapped HDDs may be worth starting with a disk diagnostic to make sure its not a dud replacement

 

[t41310]

I had another BSOD today.