kokicakokos
New member
- Local time
- 4:27 PM
- Messages
- 5
Hello,
i have a problem although i'm not sure what caused it. So here are the details ->
computer has been in sleep mode for about 6 hours when i woke it, clicked to open a program, and saw a BSOD (it hasn't happened before).
This is the info from WhoCrashed:
On Mon 29.6.2015. 18:45:40 GMT your computer crashed
crash dump file: C:\Windows\Minidump\062915-124363-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x5039)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF880015AB039, 0xFFFFF88006D36880, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\fltmgr.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
If someone could quickly explain what happened i would be grateful.
Thank You very much.
i have a problem although i'm not sure what caused it. So here are the details ->
computer has been in sleep mode for about 6 hours when i woke it, clicked to open a program, and saw a BSOD (it hasn't happened before).
This is the info from WhoCrashed:
On Mon 29.6.2015. 18:45:40 GMT your computer crashed
crash dump file: C:\Windows\Minidump\062915-124363-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x5039)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF880015AB039, 0xFFFFF88006D36880, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\fltmgr.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
If someone could quickly explain what happened i would be grateful.
Thank You very much.
Last edited:
My Computer
- Computer type
- PC/Desktop
- OS
- Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
- CPU
- Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz
- Motherboard
- Gigabyte Technology Co., Ltd. Z87-HD3
- Memory
- 8,00 GB
- Graphics Card(s)
- (1) AMD Radeon R9 200 Series (2) Intel(R) HD Graphics 4600
- Sound Card
- (1) AMD High Definition Audio Device (2) Realtek High Defi
- Screen Resolution
- (1) 1920 x 1080 x 32 bits (4294967296 colors) @ 60 Hz (2)
- Hard Drives
- ATA WDC WD5000AAKX-0 SCSI Disk Device
