thecakeguy
New member
- Local time
- 10:08 PM
- Messages
- 3
Hello, i finished building my new machine a few days ago. First i had some wierd things happening where the computer would just restart without a BSOD during windows 7 install (way before the usual place where it restarts). After running memtest and removing my graphics card it let me install windows. During windows boot i get 0x0000009c MACHINE CHECK EXCEPTION and once in a while i get "clock interrupt was not received on a secondary processor within the allocated time interval". I managed somehow to get into windows at one point and the first thing i did was update drivers and run prime95 to check the cpu. It ran fine for 10hours and 0 errors. I ran memtest again after this for 12hours and no errors there either. I checked the PSU in another computer and it ran fine there. When i try too boot up windows now i either get a black screen and then restart or one of the mentioned BSODs. If i could get into windows i would upload crash dump files, but since i cant get passed the windows logo i dont know what to do. Any ideas?
Edit: Managed to boot up in safe mode and here is the crashdumps
Edit: Managed to boot up in safe mode and here is the crashdumps
Last edited:
My Computer
At a glance
Windows 7 Ultimate x64
- Computer type
- PC/Desktop
- OS
- Windows 7 Ultimate x64