BSOD originally IRQL_not_less_or_equal is now Page_fault_in_nonpaged

[M101]

right so after re-installing windows after a video card failure and subsequent hard drive replacement due to murder (I say murder because I accidentally cut the power while windows was reinstalling, seems to have killed that drive) I have an otherwise perfectly functioning computer...except for intermittent BSOD, generally while either gaming or watching video's online although it did once do it just while browsing, no video involved.

The graphics card I am currently using is a cheap Gainward Nvidia 210, passive cooling.

it had been mounted in a PCIe x8 slot (silly mistake, it wants to be in a x16 slot), and I had been getting IRQLs until I changed it over to a x16 slot. I hoped that would solve the IRQL errors...it did...only now I get page_fault_in_nonpaged_area errors. Obviously the video card is the prime suspect but other components in the pc are a few years old now, and it's had it's share of knocks and power cuts. I thought it worth posting the dump files here to make certain before I try and get a refund/raise funds to purchase a decent one.

 

[koolkat77]

Welcome

Any reason for not updating to Service Pack 1?

Start Menu\Programs\AVG	Public:Start Menu\Programs\AVG	Public

AVG antivirus contributes in BSODs, uninstall it and replace with free MSE.
Recommended antivirus program for Windows 7 based on stability compared to others:-

• AVG | Download tools and utilities
• Microsoft Security Essentials - Free Antivirus for Windows
• Malwarebytes - The Free version
• http://www.sevenforums.com/system-security/206705-good-free-system-security-combination.html

Run a full scan with both (separately) once downloaded, installed and updated.

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA   
Usual causes:  Defective hardware (particularly memory - but not just RAM), 
Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
BugCheck 50, {fffff95f802f60f0, 0, fffff96000122bd0, 5}
Probably caused by : win32k.sys ( win32k!PostMessageCheckIL+88 )
------------------------------------------
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL 
Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, 
Backup tool, compatibility
BugCheck A, {fffff80802d068f8, c, 0, fffff80002ade115}
Probably caused by : ntkrnlmp.exe ( nt!KiIpiSendRequest+1d5 )
------------------------------------------
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL  
Usual causes:  Device driver
BugCheck D1, {0, 2, 0, fffff88014bb3384}
Probably caused by : hidusb.sys ( hidusb!HumReadReport+13f )

This tutorial might be of some help for the BSOD related to USB:
http://www.sevenforums.com/tutorials/165554-usb-driver-general-fix-problems.html

You need to update your BIOS version:

BIOS Version/Date	Award Software International, Inc. F3, [COLOR="Red"]21/12/2007[/COLOR]

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Run Disk Check on your hard disk for file system errors and bad sectors on it:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Download System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [September 2012] from Official Microsoft Download Center and then install updates including SP1 Learn how to install Windows 7 Service Pack 1 (SP1)

Keep us posted