BSOD playing almost any video game Memory_management

[Jesse99]

Hi I've just built my new computer and I've been getting constant BSOD all the time. Sometimes I wont get them for a few hours, and other times I'll get them back to back. This is the first computer that I've built that's had this many problems.

The most BSOD I get is memory_management and now I just got a page_fault_in_non_page_area

I've tried updating all my drivers
I've tried useing the Windows 7 memory diagnostic tool

thanks for all the help!

 

[Arc]

Welcome aboard.

Your crash dumps say ....

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

[COLOR=Red]BugCheck 1A[/COLOR], {41201, fffff6800000f000, 8e200001e9508867, fffffa80069a5e00}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+136f2 )

Followup: MachineOwner
---------

According to Carrona.org, STOP 0x0000001A: MEMORY_MANAGEMENThttp://www.carrona.org/bsodindx.html#top
Usual causes: Device driver, memory, kernel

So first search for a driver, if it is causing the crashes.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Also, check the memory modules.
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
Run it, for at least eight passes. Preferably overnight.

Let us know the results, with the subsequent crash dumps, if any.

 

[Jesse99]

Thank you for the Response I'll get to right on that and follow the steps needed

 

[Jesse99]

Here's my crash dump files. I crashed maybe 10 minutes into the verifier.exe, don't know it it makes a difference but for me to run sf diag tools I had to turn verfier.exe off, or else it would crash the computer. The crashes aswell werent BSOD they were just my computer freezeing forceing me to press the reset button

As of right now i need to play around with my RAMM because memtest86 shows that i have errors so i have to go down the check list for the errors/slots


Thank you for your time!

 

[Arc]

Are you sure that it is a dump during verifier running?

.............
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, 1b7d98, 2, 1b8f17}
[COLOR=Red]
Probably caused by : memory_corruption[/COLOR] ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------

Then, we are to wait upto memtest's report. May be it is the real place to search for the reasons.

 

[Jesse99]

Right now I`m running memtest and as of right now 1 of my 2 ramm sticks is showing an error when i do the memtest. As of right now I`ve done like the memtes says to do. Label my Ram and then test them out 1 by 1. Now I`ve got 1 that shows errors in the first 2 slots and the other that hasn`t shown an error.

Will keep posting updates. Thank you!

Well ive ran the memtest and it seems that 1 of my Ramm is defective, so I call the store and they are going to send me a new pair of ramm sticks. I'll have to check once i get those new sticks of ramm with the memtest again!

 

[Jesse99]

Ok so i got my new stick of ram. I ran memtest86+ just i got this problem after about 4 hours in. check the attachment for more details. Verifier has been running smoothly and no crashes up to date.

Attachment is a picture taken of my screen when running memtest86+. Memtest continues to go on as it nothing happened but i get this weird bug during the memtest that doesnt actually stop the test or give me errors.

 

[essenbe]

I had the same issue with the older version of memtest86, download and run V4.20 and it should work.

 

[x BlueRobot]

Install the older version of the program, and then re-run the test again, and post back your results please.

Test each individual stick of RAM, if an error is found then test the same RAM stick in a different motherboard slot (repeat for every slot); if an error is found in every motherboard slot then the RAM stick is bad, however, if no errors are found with the other motherboard slot then the actual DIMM slot itself may be causing problems.

Part 3 of the Memtest86+ tutorial will help clarify what to do when errors are found:

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[Britton30]

NOTE: if you get any errors, you can stop that test and go on to the next slot or DIMM module.

 

[essenbe]

Install the older version of the program, and then re-run the test again, and post back your results please.

Test each individual stick of RAM, if an error is found then test the same RAM stick in a different motherboard slot (repeat for every slot); if an error is found in every motherboard slot then the RAM stick is bad, however, if no errors are found with the other motherboard slot then the actual DIMM slot itself may be causing problems.

Part 3 of the Memtest86+ tutorial will help clarify what to do when errors are found:

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

He's running v 4.0a, it has problems with Sandy or Ivy bridge. The newer version 4.20 works well on them.

 

[x BlueRobot]

Sorry misread the post