BSOD playing Starcraft 2, BCCode: 101

[xseper]

unfotinatly now i cant crash it (before deleting drivers it was 8min max)
This time it working 1h15min
last time 10min
before 50min

im atahing 2 logs
1 idle
2 while playing (i close it by acident)

 

[xseper]

ok today i turned on game, and akter 10min crash.

i attach log (converted have swapt , to ; co it is on columns)

memory.dmp still mising - cand find it

 

[xseper]

did it one more time

 

[Vir Gnarus]

There are some really weird numbers being produced. Your motherboard may not be supported by HwInfo, or it may very well be the motherboard itself that is the problem all along (wouldn't doubt it). Can you also do the same logs with HwMonitor to see if it's a software compatibility issue?

 

[xseper]

I dont know how to do log with this program

i attach txt by hwmonitor


What next??

 

[Vir Gnarus]

Hmm, HwMonitor didn't want to display the voltages for the rails, and I looked up and found nothing about the Nuvoton NCT6776 hardware monitor in HwInfo for your motherboard, other than bugfixes for it that was from April of last year.

What you can do with HwMonitor is make a screenshot if it running just so I can have a look at it.

In addition, you may wanna start that Prime95 and have it run overnight.

 

[xseper]

ill try do prime test now (in the night it is no possible)

 

[xseper]

i startes prime 95 small test.

How long i should doing it? how to send you gained data?

 

[Vir Gnarus]

You should run Prime95 on Torture Test with Large FFTs and leave it run for about 9+ hours (or just overnight). Make sure no other programs are running at the time. When you get back and see that the system has BSODed, provide us the minidump. If the system didn't BSOD but you see that Prime95 stopped because it detected an error in its test, then we can be sure it's a hardware failure. Prime95 will run infinitely until you manually stop it or it stops because of a failure.

 

[xseper]

it would be a problem;/ i am programmer and i really need ma computer....

ill try.

somethink else to do?

 

[Vir Gnarus]

Nope, that is all. If you wish, you can turn Driver Verifier on but don't select Force Pending I/O Requests as one of the checks. Restart after setting things up and let DV run in the background until you crash again.

Though honestly, I (and yowanvista) really, really do think we're dealing with a CPU failure here. That or the other two that often show this: Motherboard and Power Supply. Either of those three can show up problems like this, though I'd blame the CPU first.

 

[xseper]

now test are running 5hours - no errors (torture test)
And i leaving it for night (in poland is 22:50 so i check about 7:00 <- it will be 13,5 hours of testing)

After that i must go away to one day, so i can leave one more test, and my fiancee turn off it at evening.
So what test i should do next? DV without Force Pending IO?

 

[xseper]

13h 16m ; 304 tests - 0 errors 0 warnings

 

[xseper]

I ran DV witout force pending IO option and with Low Resource Simulation (i dont know i did it right)

and i gain blescreen:

[FONT=Arial]Microsoft (R) Windows Debugger Version 6.2.8229.0 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\041412-19312-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03209000 PsLoadedModuleList = 0xfffff800`0344e670
Debug session time: Sat Apr 14 08:12:29.241 2012 (UTC + 2:00)
System Uptime: 0 days 0:00:26.114
Loading Kernel Symbols
...............................................................
................................................................
...........
Loading User Symbols
Loading unloaded module list
.....
TRIAGER: Could not open triage file : D:\programyWindows Kits\8.0\Debuggers\x64\triage\oca.ini, error 2
TRIAGER: Could not open triage file : D:\programyWindows Kits\8.0\Debuggers\x64\winxp\triage.ini, error 2
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff901c066328c, 0, fffff9600009bfa7, 5}


Could not read faulting driver name
TRIAGER: Could not open triage file : D:\programyWindows Kits\8.0\Debuggers\x64\triage\modclass.ini, error 2
Probably caused by : win32k.sys ( win32k!bLoadFontFile+1f3 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff901c066328c, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff9600009bfa7, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name
TRIAGER: Could not open triage file : D:\programyWindows Kits\8.0\Debuggers\x64\triage\modclass.ini, error 2

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034b8100
GetUlongFromAddress: unable to read from fffff800034b81c0
 fffff901c066328c 

FAULTING_IP: 
win32k!bLoadFontFile+1f3
fffff960`0009bfa7 448b82a4000000  mov     r8d,dword ptr [rdx+0A4h]

MM_INTERNAL_CODE:  5

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0x50

PROCESS_NAME:  csrss.exe

CURRENT_IRQL:  0

TRAP_FRAME:  fffff880025ee180 -- (.trap 0xfffff880025ee180)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff900bece38f4 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff901c06631e8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff9600009bfa7 rsp=fffff880025ee310 rbp=fffff900c0de0ef0
 r8=0000000000000001  r9=000000000000000c r10=fffff900c0de07c8
r11=fffff900c0de07cc r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
win32k!bLoadFontFile+0x1f3:
fffff960`0009bfa7 448b82a4000000  mov     r8d,dword ptr [rdx+0A4h] ds:fffff901`c066328c=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800032303bf to fffff80003285c40

STACK_TEXT:  
fffff880`025ee018 fffff800`032303bf : 00000000`00000050 fffff901`c066328c 00000000`00000000 fffff880`025ee180 : nt!KeBugCheckEx
fffff880`025ee020 fffff800`03283d6e : 00000000`00000000 fffff901`c066328c fffff960`002fb700 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x44791
fffff880`025ee180 fffff960`0009bfa7 : 00000000`00000000 00000000`00000001 fffff900`c0de0ef0 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`025ee310 fffff960`0009bd6b : fffff900`c0de0ef8 00000000`00000001 00000000`0002323c fffff900`c01c0415 : win32k!bLoadFontFile+0x1f3
fffff880`025ee400 fffff960`0009a9be : 00000000`00000000 fffff960`0009bd00 fffff900`c01c13a0 fffff900`c0de0ef0 : win32k!ttfdSemLoadFontFile+0x6b
fffff880`025ee460 fffff960`0009a8ac : 00000000`00000001 fffff900`c01c13a8 fffff900`c0de0ef0 fffff900`c0089010 : win32k!PDEVOBJ::LoadFontFile+0x7e
fffff880`025ee4f0 fffff960`0009af86 : fffff880`025ee800 00000000`00000000 00000000`00000001 00000000`00000001 : win32k!vLoadFontFileView+0x4bc
fffff880`025ee580 fffff960`0009dcb8 : 00000000`00000000 fffff880`025ee800 fffff880`00000029 00000000`00000000 : win32k!PUBLIC_PFTOBJ::bLoadFonts+0x586
fffff880`025ee6b0 fffff960`0009db5d : 00000000`00000000 00000000`00000001 fffff880`025ee9e0 00000000`00000000 : win32k!GreAddFontResourceWInternal+0x114
fffff880`025ee740 fffff800`03284ed3 : ffffffff`ffffffff 00000000`00000000 00000000`010fe9f0 00000000`00000024 : win32k!NtGdiAddFontResourceW+0x1cd
fffff880`025ee8f0 000007fe`fd9fa87a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`010ff808 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`fd9fa87a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
win32k!bLoadFontFile+1f3
fffff960`0009bfa7 448b82a4000000  mov     r8d,dword ptr [rdx+0A4h]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  win32k!bLoadFontFile+1f3

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: win32k

IMAGE_NAME:  win32k.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4f2b63bd

FAILURE_BUCKET_ID:  X64_0x50_VRF_win32k!bLoadFontFile+1f3

BUCKET_ID:  X64_0x50_VRF_win32k!bLoadFontFile+1f3

Followup: MachineOwner[B]
---------
[/B][/FONT]

ill try uncheck low resource and leave it till evening

 

[xseper]

11hours DV and nothink!

PLESE TELL ME what i can do more

 

[Vir Gnarus]

The three checks in DV that should be off are Low Resource Simulation, Force Pending I/O Requests, and IRP Logging. The rest should be left on.

While I don't think the last crashdump will help us any because you had Low Resource Simulation on, it did show loading of a font file in the crashed stack. This may not mean anything, but I do know that viruses and other malware (especially rootkits) often load themselves into computers using font files. Have you done a virus scan lately?

Honestly though, I believe me and Yowanvista agree we have a hardware problem here and that we are just dodging the issue. I call it the Trio of Trouble: Motherboard, CPU, or PSU. Most likely it's the CPU that's the problem here, but the other two have been known to cause these too.

 

[xseper]

my machine is clear.. i did 3 scans and searched for rootkits...

Is there way to diagnose what directly is wrong? I bouht my computer in parts and buildet by myself. I have warrenty but i dont know what i should return.

 

[Vir Gnarus]

It can be either the CPU, Motherboard or Power Supply. It's very difficult to tell because there are no hardware tests for motherboards and power supplies other than using a multimeter and a specialized motherboard tester, and Prime95 showed up negative for any failures. The CPU can still be the problem, though.

I recommend starting with the CPU itself first, then the motherboard, then lastly the power supply. If you own a cheap power supply, I recommend replacing that first, especially with a higher quality PSU, since the cheaper the PSU, the higher the chance of failure.

 

[xseper]

ok ill be trying...

when i achive somethink i write it here

My psu is not hi end, but is not cheap one either
whole mashine (whithout dvd) cost me about 450$
PSU about 60$

 

[Vir Gnarus]

What brand was the PSU? Brand name makes a big difference.