BSOD power failure

[YozMan]

I've been using W7 since it went public, within the last 18 hours I got about 15 BS'sOD. I think the problem had something to do with the fact that I plugged my laptop into a power strip BEFORE turning the power strip on...idk. But whenever I plug in my laptop it takes about 30 seconds for a BSOD to show. I copied a couple down, here they are:

1.   0x0000008E(0xC0000005, 0x8BFAE3D1, 0x91C8DA94, 0x00000000)

2. IRQL_NOT_LESS_OR_EQUAL
    0x00000000, 0x00000002, 0x00000001, 0x82C5DC91

3. 0x0000008E (0xC0000005, 0x8CBB63D1, 0x8BA84A94, 0x00000000)
    KI1.sys - Address 8CBB63D1 base at 8Ca0900 Data Stamp 4911af5e

4. STOP: 0x0000008E ( 0xC0000005, 0x8BDB73D1, 0x8BB8FA94, 0x00000000 )
    Kl1.sys - Address 8BDB73D1 base at 8BC0A000, Data Stamp 4911af5e

What I've tried:

1. Unplugging the power cord. Result: nothing happens but the battery drains so I eventually had to plug back in.
2. Removing the battery. Result: I didn't get a BSOD for about 25 minutes.
3. Using a different power source with battery. Result: Same as with original power source.
4. Using a different power cord. Result: BSOD after 30-45 minutes.
5. Plugging in computer when closed. Result: this works but I can't use the computer....

Currently I'm using 1, 4, and 5.
Computer specs:

• Dell Inspirion E1705
• 1gb ram
• 40gb HD

Please help! This is really annoying.
FYI: I posted a similar message on the Microsoft forum but all they told me was that it was a driver problem...I'd like to know is there anything I can do? and what those bug codes mean.

 

[YozMan]

Problem solved??

UPDATE::
So I've been plugged in for the past 3 hrs and no BSOD yet, I don't know what changed... I don't think anything has...

I'm just chalking it up to The Mystery of Windows.

 

[YozMan]

Problem NOT solved

So I just got another BSOD with power cord connect and disconnected.
so I'm totally lost....

 

[Jacee]

Kl1.sys is located here:
C:\WINDOWS\system32\drivers\kl1.sys

It's a driver for Kaspersky antivirus. You may need to uninstall Kaspersky and re-install it again.

 

[YozMan]

Yeah that's what I ended up doing.
thank you.