BSOD problem

[eslamdeepo]

hi plz i have problem with my windows 8 and windows 7 x64 i get the same BSOD in the 2

it happeds most while gaming

my main BSOD is 0x00007e & 0x00001e and its says in the log

kmode_exception_not_handled caused by ntoskrnl.exe & hal.dll

kmode exception not handled dxgmms1 sys

kmode_exception_not_handled caused by ntoskrnl.exe

or it says in the evant logs kernel-power critical error any 1 help me plz

my system :

ma785gt-ud3h

apooge ddr3 ram 1333 4gb

amd 7750

amd pehom IIX4 955

power: seasoinc 500w

i uploaded the logs of my evant log and system info

 

[Golden]

No dmp files attached, so no BSOD analysis possible.

Check to ensure system is configured to produce dmp file:
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

Now when it BSOD's again, run this to gather all information, and upload it here again:
http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[eslamdeepo]

look at this

 

[Golden]

Thats very interesting but I can't help you unless you physically upload the .dmp and associated files for me to analyse. Please see post #2.

 

[eslamdeepo]

here it is

 

[Golden]

Run this .bat file - it creates a zip folder on your desktop. Upload the whole folder in your next reply - please don't dribble bits of information to me. Upload it all in one go.

View attachment 300523

 

[eslamdeepo]

here it is

 

[eslamdeepo]

and this logs for today

 

[Golden]

I'll have a look when I get home this evening.

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff802014c1445, ffffd0002b2ced40, 0}

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

Unfortunately I can't get any detail....perhaps because its W8. I'll have to request more help on this.

 

[Arc]

The crash dump file is incomplete. So it is not giving the necessary results.

Stop 0x3B BSODs are caused by two things mainly. A failing device driver (specially the graphics driver) or a failing RAM. So .....

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any, as per the Blue Screen of Death (BSOD) Posting Instructions.

 

[eslamdeepo]

i will try