BSOD problem

agevkired · Mar 20, 2010

computer constantly crashes. Just got one a few minutes ago. It was IRQL not less or equal. the attachment contains all dump files.

Specs:
pentium 4 3.06Ghz, socket 478, 533Mhz
geforce 7600gs
1.5GB RAM pc2700 2 kingston and 1 unknown
L4VXA2 motherboard with latest BIOS
just pc 425watt PSU
PPA Int'l 4 channel sound card

usasma · Mar 20, 2010

9 memory dump files from 20 Feb to 19 Mar 2010.

The Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following (this will not affect the analysis of the current files - but it may help later files that are acquired):
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds

So, we'll have to do this the old fashioned way:
The dump files are 7 STOP 0xA and 2 STOP 0x1A
Info on the STOP 0xA: BSOD Index
Info on the STOP 0x1A: BSOD Index

First I'd suggest a set of hardware diagnostics:

H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)

Then, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers. Please pay particular attention to any dated 2007 or earlier:

Code:

sensorsview32.sys Sat Jul 26 09:25:10 2008 - Sensor Monitoring Utlity driver - http://www.carrona.org/dvrref.html#sensorsview32.sys
Envy24HF.sys Wed Mar 14 20:56:51 2007 - Envy24 Family Audio Controller WDM by VIA/IC Ensemble - http://www.carrona.org/dvrref.html#Envy24HF.sys

Summary of the BSOD's:

Code:

[FONT=lucida console]  
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Sat Mar 20 02:14:55.338 2010 (GMT-4)
System Uptime: 0 days 14:19:28.323
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82cab9b2}
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+176 )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Tue Mar 16 02:04:48.827 2010 (GMT-4)
System Uptime: 0 days 11:13:37.811
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82c909b2}
Probably caused by : ntoskrnl.exe ( nt+569b2 )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Sun Mar 14 16:17:17.360 2010 (GMT-4)
System Uptime: 0 days 2:16:11.360
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82c949b2}
Probably caused by : ntoskrnl.exe ( nt+569b2 )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Sat Mar 13 17:11:59.116 2010 (GMT-4)
System Uptime: 0 days 2:49:57.100
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82ca09b2}
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+176 )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Fri Mar 12 14:56:01.414 2010 (GMT-4)
System Uptime: 0 days 0:13:38.414
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BUGCHECK_STR:  0x1a_5100
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar  8 01:26:15.540 2010 (GMT-4)
System Uptime: 0 days 9:09:32.540
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82c9e9b2}
Probably caused by : ntoskrnl.exe ( nt+569b2 )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Sat Feb 27 23:58:26.704 2010 (GMT-4)
System Uptime: 0 days 8:18:09.688
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BUGCHECK_STR:  0x1a_41287
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Fri Feb 26 00:38:43.986 2010 (GMT-4)
System Uptime: 0 days 10:43:50.970
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82c569b2}
Probably caused by : ntoskrnl.exe ( nt+569b2 )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Sat Feb 20 19:01:24.879 2010 (GMT-4)
System Uptime: 0 days 16:47:15.864
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
BugCheck A, {ffcf000c, 2, 0, 82c8e9b2}
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+176 )
BUGCHECK_STR:  0xA[/FONT]

BSOD problem

agevkired

New member

My Computer

usasma

Mr. Cranky Pants

My Computer