BSOD random and when playin games

[parenzo]

Hello,BSOD started to occur when I installed clean version of Windows 7 x64 couple of months. I also have another HD. with windows 7 x86 installed, they obv. dont run together cos one is unpluged when other runnning but wiered thing is that BSOD happens on both HD.s(so hard discs we can exclude as a problem)
i have also stoped updating windows after last big update cos I couldnt boot my comp after latest update(I restored from safe mode)
i am playing a lots of online games and 90% of crashes happend when i was playin,but sometimes crash randomly.

version of OS is full reatil installed couple of months ago
hardwer is 2-3 years old(same configuration worked without any BSOD on my previous OS
(vista ultimate)

 

[zigzag3143]

Related to kernexplorer.sys ad-aware security program from Lavasoft. I would simply remove it.

 

[parenzo]

kk,will do that,but i think bsod started before I installed that free version of ad-aware.
hope will help,thx
oh and on my other HD. with 32 bit win. 7 i have no anti virus installed and bsod still occur

 

[parenzo]

so far for last 2 weeks i had no more bsod on my 64 bit system.
but on my 32 bit system I continue to get bsod.
finally managed to collect report for latest crash...
also i tred "driver verifier" as instructed but during test i got no bsod(I run it for around 12 hours with no crash,wiered right?)

 

[writhziden]

Many of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.

• If you are overclocking any hardware, please stop.
  
  
• Check Windows for corruption. Run http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to provide us with the sfcdetails.txt file if errors occur.

Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.

1. Download the drivers you want for your display card(s)
2. Click Start Menu
3. Click Control Panel
4. Click Uninstall a program
5. For AMD:
   • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
   • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):
     1. Click Start Menu
     2. Right Click My Computer/Computer
     3. Click Manage
     4. Click Device Manager from the list on the left
     5. Expand Display adapters
     6. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
     Alternatively:
     1. Login as an adminstrative user
     2. Click Start Menu
     3. Click Control Panel
     4. Click Hardware and Sound
     5. Click Device Manager (the last link under Devices and Printers)
     6. Expand Display adapters
     7. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
6. Restart your computer after uninstalling drivers for all display cards
7. Install the driver you selected for the display cards once Windows starts

Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.

 

[parenzo]

not really sure if any errors occured while runing sfc.(run it 3 times anyway) report from last one in att.

also i have never overclocked my components,dxdiag found no problems.
graphic driver was up to date but i followed instructions above and reinstall it
anyway.

 

[parenzo]

wow,thing getting worse and worse..
had 2 bsod in short period of time,after reinstalling graphic driver.
here are last 2 reports..

 

[parenzo]

running out of options here so I just run a huge windows update,will see what that does to stability...

 

[writhziden]

You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html and use the following hardware checks to supplement that link.

• If you are overclocking any hardware, please stop.
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.​
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html for the crash.

 

[parenzo]

so far i did temp. check,looks fine by me..

Intel Core 2 Duo E8500 @ 3.16GHz 46 °C
Wolfdale 45nm Technology

RAM
8,00 GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)

Motherboard
Gigabyte Technology Co., Ltd. EP43-DS3 (Socket 775) 41 °C

Graphics
SyncMaster (1920x1080@59Hz)
ATI Radeon HD 4800 Series (ATI) 80 °C

Hard Drives
313GB Maxtor Maxtor 6V320F0 ATA Device (SATA) 36 °C

 

[parenzo]

hm,temperatures of cpu and motherboard jumped drrasticly when i started running some other test...
CPU
Intel Core 2 Duo E8500 @ 3.16GHz 88 °C
Wolfdale 45nm Technology

Motherboard
Gigabyte Technology Co., Ltd. EP43-DS3 (Socket 775) 81 °C

 

[writhziden]

Those are rather high. Have you tried cleaning out the dust?

To remove dust, follow the subsequent general procedure. If you have a desktop bought from Dell, HP, Sony, Lenovo, etc. make sure removing the desktop casing will not void your warranty first. Call the company if you are still under warranty and ask if it is okay to remove the casing and blow dust out. The procedure described is fine for laptops; just make sure no stickers are on panels saying if you remove the panel it will void the warranty.

1. Shut down and turn off your computer.
2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
4. Remove the casing for a desktop, or remove any screwed on panels and disc drives for laptops.
5. Blow out the dust inside by using a can of compressed air or a low pressure compressor. You will want to put the computer on a desk or table so you can maintain the can in an upright position if using a can of air. Blow into all crevices on the motherboard, heat sinks, cards, modules, etc. for a desktop. Blow into vents, opened panels, disc drive areas, USB ports, and the keyboard if it is a laptop. You may also want to blow inside the disc drive by replacing the drive to the laptop, starting the computer, opening the drive, and then turning off the computer and removing all power as described above including the 30 second power button step. For a desktop, you may also want to blow inside the disc drive by starting the computer, opening the drive, and then turning off the computer and removing all power as described above including the 30 second power button step.
6. Replace casing for the desktop. Replace panels and disc drive (if you have not already done so) for the laptop.
7. Plug power supplies in. AC adapter for the desktop. Battery and then AC Adapter for the laptop.
8. Start the computer and see if performance is better.