BSOD Random Crashes.

[klemka]

Hello,

Recently finished my first pc build. And been having problems from the start. The most recent one is the blue screen of death. Bios are updated, drivers updated, memtest has been run with no errors, harddrive checked no errors. Running out of ideas what to do.

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Extra information about the problem
BCCode: 7a
BCP1: FFFFF6FC5006C410
BCP2: FFFFFFFFC000000E
BCP3: 00000000758C3880
BCP4: FFFFF8A00D882000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Any ideas are appreciated!

 

[klemka]

Update

it is either the blue screen of death or all my applications get a "critical error", explorer shutdowns and i am left staring at my desktop backround. Also i dismissed overheating problems, everything runs pretty cool 25-30C.

 

[Arc]

Hi klemka.

There is no crash dump in the zip that you uploaded. But your post gives us some info.

BCP2:	FFFFFFFF[COLOR=Red]C000000E[/COLOR]

The parameter 2 is the I/O error status code. And ..... the explanation says .....

KERNEL_DATA_INPAGE_ERROR  (7a)
 The requested page of kernel data could not be read in.   [COLOR=Red]Typically caused by
 a bad block in the paging file or disk controller error[/COLOR]. Also see
 KERNEL_STACK_INPAGE_ERROR.
 [COLOR=Red]If the error status is 0xC000000E[/COLOR], 0xC000009C, 0xC000009D or 0xC0000185,
 [COLOR=Red]it means the disk subsystem has experienced a failure[/COLOR].
 If the error status is 0xC000009A, then it means the request failed  because
 a filesystem failed to make forward progress.

Test your HDD using Data Lifeguard Diagnostic for Windows.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :

• Double click to open it.
• Click this button only:
• 
• If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.

Let us know the results.

 

[klemka]

Tested HHD passed.

Uninstalled daemon tools as recomended.

 

[klemka]

Still getting random crashes. But not blue screen. One program after another start shutting down with the the erro message i posted in earlier posts. Then expolorer shuts downs, then i have to restart....

 

[Arc]

Let us see a screenshot of the error message?

Also scan the system for possible virus infection with the following programs.

• Anti-rootkit utility TDSSKiller
• Windows Defender Offline

 

[klemka]

Attached a pic with the error.

 

[Arc]

I/O Status.status 0xC00000C0: STATUS_DEVICE_DOES_NOT_EXIST. That means, "This device does not exist." During the use of explorer. So the question is, which device it is? Is it missing the proper driver?

It may be occurred due to loose connection, too (+ a lot of other reasons, including a motherboard corruption).

After having the virus check, can you attempt to a complete dismantle and re-seat of the computer?

 

[klemka]

Both scans found nothing. Have opened the case and fiddled with the hard drive wiring. Crashes have seemed to stop. As soon as i have one i will reassemble the PC.

 

[Arc]

Both scans found nothing. Have opened the case and fiddled with the hard drive wiring. Crashes have seemed to stop. As soon as i have one i will reassemble the PC.

Well done.

 

[klemka]

So, computer still crashed. Did a rebuild, placed the graphics card in another slot, changed wiring to the harddrive. Connecting hdd to mb slot 0/1, had no effect (no bootable device, although i did not check via bios if anything showed up in the hdd setup) guess they are broken/defected ? After connecting to slot 3 everything booted fine, after an evenings use everything seemed in oder, left computer on over night to see if it would crash. Came today from work everything seems in perfect condition, maybe i should leave it on for the night with a stress test on? Hope this is the end of my problems.... Or is it > Thanks for your help Arc.

 

[Arc]

Hi klemka.

If it runs good, let it run as it is. Just observe the situation. If it causes any more problem, let us know.

 

[klemka]

Hey,

Back for more Computer still crashes, but now the diference is that it has been 3days since the last crash...all the same errors.

 

[Arc]

Supply the data as per BSOD posting instructions?