BSOD regularly haven't noticed pattern

[Muldrossi]

Hi all,

I've been having BSOD's quite regularly (about once an hour) in the last few months. I have no idea what might be causing it, though I see in the minidumps it has something to do with the driver ntfs.sys, and thus be linked to my hard drives. I wouldn't know which one though, I have 2 hard drives (one very old) and an ssd on which the OS is running. Hope some of you can help me out.

Thanks upfront!

 

[koolkat77]

Welcome to SevenForums.

Did you update to the latest firmware for your SSD?

Upload a screenshot of your hard disk using CrystalDiskInfo:

• CrystalDiskInfo - Software - Crystal Dew World
• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

Make a hard drive test from the hard drive manufacturers website:

• Hard Drive Diagnostic Procedure

Run Disk Check on your hard disk for file system errors and bad sectors on it:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Hard drive test both short and long with:

• SeaTools for Windows

Also the DOS version of:

• SeaTools for DOS
• SeaTools for DOS tutorial

Perform a System File Check:

• Click on the rb:
• Type CMD on Search
• Left click and Run as Administrator
• Type SFC /scannow

Full tutorial here:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

---

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.

*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
​

If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.

*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
​

*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
​

3. Test the next stick of RAM (stick #2) in the next motherboard slot.

*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
​

*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
​

4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

   Information

Errors are sometimes found after 8 passes.

   Tip

Do this test overnight, before going to bed.

Post back results.