BSOD, unknown problems...files attached

[fatwalrus]

Hi, my new computer has had only a few random blue screens in its short life. Recently I got two within a week, so I think there may be a problem...


Here is a log of the most recent event...

Problem signature:
  Problem Event Name:	BlueScreen
  OS Version:	6.1.7601.2.1.0.768.3
  Locale ID:	1033

Additional information about the problem:
  BCCode:	fe
  BCP1:	0000000000000008
  BCP2:	0000000000000006
  BCP3:	0000000000000005
  BCP4:	FFFFFA800B716000
  OS Version:	6_1_7601
  Service Pack:	1_0
  Product:	768_1

Files that help describe the problem:
  C:\Windows\Minidump\031312-29156-01.dmp
  C:\Users\<User>\AppData\Local\Temp\WER-72540-0.sysdata.xml

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

Any help would be much appreciated, I followed the BSOD tutorial sticky just to be nice

Specs:
Windows 7 64 Bit, was installed on this new computer I bought last June.

 

[zigzag3143]

Both were related to memory. In the first it was your network driver and in the second, your USBHUB.

Please update The citrix Deterministic Network enhancer Miniport VPN client. Your is from 2007



These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.



Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html



Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

 

[fatwalrus]

Thank you, I will out your solutions and let you know if I experience any other issues.