Solved BSOD usually when downloading something or on youtube, tcpip.sys

[jacksoncollins]

Hi i've been getting blue screens for over 6 months now just never really bothered with them until now
that its annoyed me that much to the point, my system specs are on my account (not sure if you can see them) and im running windows 7 x64 ultimate and the BSOD usually happen when im on google chrome (not sure if that's the problem) i have no anti-virus and basically any kind of downloading causes it although sometimes it doesn't happen while downloading

-Much appreciated, Jackson

 

[koolkat77]

systeminfo:
Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the syteminfo.txt file. If you have difficulties with making this work, please post back. Then zip up the .txt file and upload/attach the .zip file with your next post.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter. Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post. Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

 

[koolkat77]

AODDriver2.sys              Thu Apr  5 15:23:37 2012

(AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems. Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program.

Or use Revo uninstaller Free. -

   Information

• :info: Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page) Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

------------------------
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:

• Click on the rb:
• Type CMD on Search
• Left click and Run as Administrator
• Type SFC /scannow - read here

Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
------------------------
Daemon Tools (also Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall Daemon Tools.

• DuplexSecure - FAQ

As an alternative:

• We recommend the use of Total Mounter or Magic ISO

-------------------------
Update your Intel Ethernet Driver to its latest:
e1q62x64.sys Fri Nov 6 00:23:03 2009 (4AF31807) Intel Ethernet

• Driver Reference Table - e1q62x64.sys

------------------------
Make scans with these tools -

• TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
• Online Virus Scanner Eset

------------------------
Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• :info: Pay close attention to Part 3 of the tutorial "If you have errors"
• :tip: Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Let us know the results.

Dumps.

[FONT="Lucida Console"]Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Mon Aug 26 13:48:06.843 2013 (UTC + 6:00)
System Uptime: 0 days 2:01:49.998
BugCheck D1, {90, 2, 1, fffff88006f99ed3}
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : e1q62x64.sys ( e1q62x64+18ed3 )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Mon Aug 26 08:35:48.816 2013 (UTC + 6:00)
System Uptime: 0 days 6:00:03.956
BugCheck D1, {9, 2, 0, fffff8800164449c}
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : tcpip.sys ( tcpip+4449c )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``[/FONT]

 

[jacksoncollins]

Tried your first message didn't really work well for me then with the second, did everything up to the scanning and the 1st one scanned 2 error files and fixed and the 2nd scanned 4 and fixed but with the ram i have no usb or cd at the moment so i will have to get back to you, thanks for the quick reply sorry i didn't reply sooner, had work!

-Thanks, Jackson

 

[koolkat77]

Take your time

 

[jacksoncollins]

So far from all i've done I haven't got a BLOD yet, i will inform you if i end up getting one, Thanks for your help

 

[koolkat77]

You're welcome! And glad I can help!
Please post if you have them again