BSOD Various errors

[EvanWill]

How can I fix these BSODs? After reading other forum posts, it is to my understanding that you can use my Minidump files, so I attached them to the thread.

 

[solarmystic]

Hello and welcome to the forums, EvanWill!

Please follow these instructions completely so that we can have a look at your problem:-

http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

 

[writhziden]

Agreed, please follow the instructions. Also, please answer why there are .dmp files with a date of January 1st, 2001?

 

[EvanWill]

Sorry.

System Specs-
-Windows 7
-x64 bit Operating System
-Windows 7 Home Premium
-OEM
~2 Years Old
~2 Years OS (Unless a system restore re-installs the OS. In that case I re-installed about two months ago)

Also the dates that show up from Jan 1, 2001 were from a trip I took up to WA. For some reason the date switched on my laptop and it crashed then. I fixed the date and time once I realized.

In the BSOD Posting Instructions it said to attach the "PERFMON HTML file" but when I tried to attach it it was invalid. I see that the file is inside the Windows_NT6_BSOD_jcgriff2 but I don't know if it is supposed to be attached by itself.

 

[writhziden]

Your jcgriff2 reports were incomplete. We cannot offer much advice without them. The perfmon report you need to compress (zip) and send that way. I'll do my best to analyze what we do have...


Analysis:

Crashes themselves primarily point to hardware. Run some hardware checks.

• If you are overclocking any hardware, please stop.
  
  
• If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
  
  
• Run all but the advanced tests with SeaTools for HDDs.
  SeaTools for Windows
  
  SeaTools for DOS​
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.​
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  
     Warning

  Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!
  
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

3rd Party Drivers:

The following is for informational purposes only:

hamachi.sys Thu Feb 19 03:36:41 2009 (499D3639)
usbfilter.sys Fri Apr 3 05:39:51 2009 (49D5F587)
HpqKbFiltr.sys Wed Apr 29 07:48:30 2009 (49F85AAE)
AtiPcie.sys Tue May 5 09:00:22 2009 (4A005486)
Apfiltr.sys Tue May 12 03:38:59 2009 (4A0943B3)
GEARAspiWDM.sys Mon May 18 06:17:04 2009 (4A1151C0)
enecir.sys Wed May 20 00:08:57 2009 (4A139E79)
hpdskflt.sys Wed Jul 8 12:41:38 2009 (4A54E862)
Accelerometer.sys Wed Jul 8 12:41:38 2009 (4A54E862)
mcupdate.dll Mon Jul 13 19:29:09 2009 (4A5BDF65)
AtiHdmi.sys Fri Jul 24 00:33:11 2009 (4A6955A7)
atikmdag.sys Tue Aug 4 22:14:11 2009 (4A790713)
TuneUpUtilitiesDriver64.sys Thu Sep 17 05:54:52 2009 (4AB2238C)
athrx.sys Mon Sep 21 20:47:11 2009 (4AB83AAF)
amdxata.sys Fri Mar 19 10:18:18 2010 (4BA3A3CA)
stwrt64.sys Tue Mar 23 22:01:24 2010 (4BA98E94)
dc3d.sys Wed May 18 02:07:24 2011 (4DD37E3C)
usbaapl64.sys Tue Jan 10 17:56:04 2012 (4F0CDE24)

hamachi.sys
usbfilter.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
enecir.sys
hpdskflt.sys
Accelerometer.sys
mcupdate.dll
AtiHdmi.sys
atikmdag.sys
TuneUpUtilitiesDriver64.sys
athrx.sys
amdxata.sys
stwrt64.sys
dc3d.sys
usbaapl64.sys​