BSOD was running window Performance Rating "BugcheckCode">292Data

[Jnorm]

BSOD was running window Performance Rating "BugcheckCode">292Data

Hello i was running the window performance check tool to get the rating and my computer had a BSOD, the code is below on the BSOD it also said uncorrectable hardware error 0x124 issue. ANy help would be amazing its a new computer and i ran the memtest both 3rd party and windows, also ran the hdd check errors, and updated my drives. I only so far have recieved this screen once i have tryed to get the BSOD but i havent been able to spend tons of time to get it to pop up, i only have had the computer 1 day. Thank you soo much for the help.

Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>



<EventRecordID>8079</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>



</System>


- <EventData>
<Data Name="BugcheckCode">292</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name="BugcheckParameter2">0xfffffa800d04d028</Data>

<Data Name="BugcheckParameter3">0xb2000000</Data>

<Data Name="BugcheckParameter4">0x7c000402</Data>

<Data Name="SleepInProgress">false</Data>

<Data Name="PowerButtonTimestamp">0</Data>

</EventData>


</Event>

 

[Hanna 1]

Welcome to the forum
Try to see the following thread:

http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html
Good luck

 

[JMH]

Jnorm,
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.