Solved BSOD when I connect to wireless network

[tbronson]

I have an HP Envy DV7-7247cl that came installed with Windows 8. Due to software that I use (AutoCAD) I wiped the hard drive and installed Windows 7 Professional. Everything was working great for about 3 months. I started getting BSOD when I was connecting to my wireless network. I have not had any problems when I disable the wireless card or when I am connected to a docking station. I uninstalled/reinstalled every driver I could find for the Realtek wireless card that was installed. Nothing helped. Since the driver was not causing the problem I assumed the card must have gone bad. I ordered and installed an Intel Centrino Advanced-N 6235 card. Things seemed great for about a week then the BSOD started happening again. Any help would be great. I am at a loss.

Thanks,
Todd

 

[essenbe]

When you installed Windows 7, did you use Windows 7 drivers ot install the Windows 8 drivers? The last dump files were 7-29-14 and there were 3 of them. In those 3, were the exact thing.

lmvm hpdskflt
start             end                 module name
fffff880`0181c000 fffff880`01826000   hpdskflt T (no symbols)           
    Loaded symbol image file: hpdskflt.sys
    Image path: hpdskflt.sys
    Image name: [COLOR=red]hpdskflt.sys[/COLOR]
    Timestamp:        [COLOR=red]Tue Apr 10 14:50:35 2012[/COLOR] (4F848F0B)
    CheckSum:         00015631
    ImageSize:        0000A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

That is the HP Mobile Data Protection System Disk Filter and can be updated at
HP® Official Site | Laptop Computers, Desktops, Printers, Servers, Services and more Win7 - http://h20000.www2.hp.com/bizsuppor...&idx=2&prodTypeId=321957&prodSeriesId=1847703

Also listed was

 lmvm [COLOR=red]SamsungRapidDiskFltr[/COLOR]
start             end                 module name
fffff880`01686000 fffff880`016ca000   SamsungRapidDiskFltr T (no symbols)           
    Loaded symbol image file: SamsungRapidDiskFltr.sys
    Image path: SamsungRapidDiskFltr.sys
    Image name: SamsungRapidDiskFltr.sys
    Timestamp:        Mon May 19 09:24:16 2014 (537A1410)
    CheckSum:         00046A34
    ImageSize:        00044000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

That is the Samsung RAPID Mode Disk Filter driver and should be able to be updated at Download Center: Download Software, Firmware, Drivers & Manuals | Samsung

Also, the Samsung Rapid mode Filter may or may not be a cause of your issues but may be listed because it was in use at the time of the BSOD. However, I would make sure the driver is up to date and the firmware is up to date. See if updating those makes the issue better and let us know the results.

 

[tbronson]

I did use drivers for Windows 7. I will try your suggestions and get back with you.
Thanks.

 

[essenbe]

OK, good. Just let me know. If you have any further problems, just upload the dumps.

 

[tbronson]

The HP Mobile Data Protection System Disk Filter was the latest version available on HP's website. I just uninstalled it and have had not had any problems since then.
THANK YOU, THANK YOU.

Todd

 

[essenbe]

You're more than welcome, but I would give it more time before declaring it fixed.