Install Service pack 1.
Code:
[COLOR=Red]Windows 7 Kernel Version 7600 MP [/COLOR](2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17118.x86fre.win7_gdr.120830-0334
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows
It is a stop 0x116, which is a display/video related bugcheck.
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 116, {86926408, 8e3b986e, 0, 2}
Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+786e )
Followup: MachineOwner
---------
You need to follow the guide:
http://www.sevenforums.com/crash-lo...op-0x116-video_tdr_error-troubleshooting.html
Your dispaly driver is kinda old.
Code:
lmvm atikmpag
start end module name
8e3b2000 8e3fe000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
[COLOR=Red] Image name: atikmpag.sys
Timestamp: Wed Jul 04 10:40:31 2012 [/COLOR](4FF3D047)
CheckSum: 0004B11D
ImageSize: 0004C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update your ATI/AMD display driver.
You can get it from the link in our forum,
http://www.sevenforums.com/graphic-...alyst-video-driver-windows-7-a.html#post17671, or you may go to
AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.
During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.
Aslo stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
If you overclocking, get rid of all the overclocks, set them all back to normal.
Clean inside the computer very carefully, including the air vents and fans.
Monitor the system temperature and the graphics card's temperature using
Speccy.
Let us know the results.
