Solved BSOD when Running Folding@Home, error code 0x00000116

[Brasky]

Reconfigured Rig for folding and it's been folding for over a year or so off and on, usually goes in spurts of working for a week or a month, then just constant bsod errors. went though several drivers from 310.90 to the 314.22 today, still issues. PSU is HX1050 so that should be sufficient. Here are the Zipped SF System Info file and 2 of the bluescreen view files. I'm out of ideas and any help would be appreciated.
Thanks.

 

[x BlueRobot]

[COLOR="red"]BugCheck 116[/COLOR], {fffffa800e4ef4e0, fffff88006005f60, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by :[COLOR="Red"] nvlddmkm.sys[/COLOR] ( nvlddmkm+931f60 )

Usual causes:  Video driver, overheating, bad video card, BIOS, Power to card

11: kd> [COLOR="SeaGreen"]lmvm nvlddmkm[/COLOR]
start             end                 module name
fffff880`056d4000 fffff880`0617b000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        [COLOR="Red"]Fri Jan 18 13:22:15 2013[/COLOR] (50F94C87)
    CheckSum:         00A92B69
    ImageSize:        00AA7000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

• NVIDIA Driver Downloads - Advanced Search

Version: 314.22
Release Date for Desktops and Notebooks : March 25th 2013
In Device Manager: 9.18.13.1422

1. Download Driver
2. Start rb: Type: Device Manager
3. Expand Display Adapters
4. Right-Click Driver Name, Uninstall
5. Reboot
6. Run Driver Sweeper
7. Reboot
8. Install Downloaded Driver

Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:

• http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html

Update BIOS (if possible):

BiosVendor = Phoenix Technologies, LTD
BiosVersion = 6.00 PG
BiosReleaseDate = [COLOR="red"]10/25/2010[/COLOR]

Scan for any missing, modified or corrupted protected Windows files with:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

 

[Brasky]

Appreciate the response, steps were followed and no luck, can't even get the windows experience index testing to run, so it looks like i'll be attempting to RMA the offending card.

 

[x BlueRobot]

What were the results of the system file scan? Did you manage to update the BIOS?

 

[Brasky]

no integrity violations, bios was successfully updated, and the driver was swept. I know it's not the motherboard since it's worked before, the video cards have had that nvidia issue for a while off and on, so now the goal is to figure out which one is the culprit.

 

[x BlueRobot]

http://www.sevenforums.com/tutorials/160729-nvidia-amd-video-card-test-occt.html

   Warning

Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components

Use the following program to monitor your hardware temperatures during the stress test:

• CPUID HWMonitor

 

[Brasky]

temps are good, i'm going to play with the cards this weekend and see if one of them is bad, thanks for the help.

 

[x BlueRobot]

Okay, will be looking forward for your results. What was the temperature?

 

[Brasky]

Okay, will be looking forward for your results. What was the temperature?

didn't get to it this weekend, but the cards are watercooled and have been for the past year or so, so i might have to take apart the blocks and clean them out. maybe a little tune up will help everything get back to normal. thanks for keeping up with the thread, i'll post again after i get some results.
Thanks.

 

[x BlueRobot]

Okay post your results when your done.

 

[Brasky]

so i didn't do any of the stuff i said i was going to, maintenance wise. but i think i might have figured out the issue which wasn't even windows related, but rather the power supply was not getting enough air. never even thought of that until a few days ago and everything seems to be working well. (Crosses Fingers) Funny and sad at the same time, but oh well.

 

[x BlueRobot]

Okay, thanks for the update, glad your issue seems to be solved.