Solved BSOD while loading Mixcraft :: APC_INDEX_MISMATCH ntoskrnl.exe+75c40

[Arc]

We cannot do anything with the information you supplied. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

 

[soundsquire]

Here is the grab file from the SF tool.

 

[AC]

For one, you have some very old drivers. Update all drivers you see via Windows Update. I am taking a look at the dumps now.
BrFiltLo Brother USB Mass-Stora Kernel 8/6/2006 9:51:06 PM
BrFiltUp Brother USB Mass-Stora Kernel 8/6/2006 9:51:02 PM
Brserid Brother MFC Serial Por Kernel 8/6/2006 9:51:11 PM
BrSerWdm Brother WDM Serial dri Kernel 8/6/2006 9:51:05 PM
BrUsbMdm Brother MFC USB Fax On Kernel 8/6/2006 9:51:00 PM
BrUsbSer Brother MFC USB Serial Kernel 8/9/2006 8:11:02 AM

Those are just some. Update all drivers in your system via Windows Update/ manufacture website.

 

[AC]

Are you overclocking at all? If so, return to default clock speeds.

 

[Pauly]

Looks like its been overclocked at some point but not during these dumps

[Processor Information (Type 4) - Length 42 - Handle 000fh]
  Socket Designation            CPUSocket
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel(R) Corporation
  Processor ID                  a9060300fffbebbf
  Processor Version             Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
  Processor Voltage             b8h - 5.6V
  External Clock                100MHz
  [B]Max Speed                     3800MHz[/B]
[B]  Current Speed                 3500MHz[/B]
  Status                        Enabled Populated
  Processor Upgrade             Specification Reserved
  L1 Cache Handle               000ch
  L2 Cache Handle               000bh
  L3 Cache Handle               000dh

Your driver verified dumps are blaming NTWinCDEmu.sys as the cause, this is drive emulation software for (probably) mounting .iso files try removing it for testing purposes

These drivers are very old look into updating them
bbcap.sys 02/11/2007 07:30:12
FNETURPX.SYS 04/10/2008 02:27:02
akshasp.sys 02/02/2009 15:47:42

 

[soundsquire]

I think that is NIWinCDEmu.sys. This appears to be a Native Instruments driver for Kontakt 5. I think it loads the instrument samples into the Kontakt sound library. I am checking with their support for a fix.

 

[soundsquire]

Ok...here is where I am at now. I contacted Native Instruments and went through an un-install and re-install on Kontakt. They are reporting the NIWinCDEmu.sys file is not theirs? Weird because it says it is? :huh: See attached.

OK...so I deleted the file and after reinstalling Kontakt it did not show up?

Here is the fun part...still crashing but again only when I launch Mixcraft. I attached the new grab after running the driver verifier again and it is pointing to MAudioFastTrackC400_DFU.sys as the culprit. I have already reinstalled the drivers for it (see earlier in this thread). Hmm?

After checking the M-Audio support forums it seems there is an issue with system power settings. Someone else was having a similar problem because the system was sleeping and then causing a crash on wake and launch of the software that was using the interface. I have changed my system settings to never sleep and am hoping this helps.

Any other thoughts?

 

[Arc]

It is crashed by M Audio Fast Track.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {23b, fffff880057761e8, fffff98009e2ab80, 0}

*** WARNING: Unable to verify timestamp for MAudioFastTrackC400_DFU.sys
*** ERROR: Module load completed but symbols could not be loaded for MAudioFastTrackC400_DFU.sys
Probably caused by : MAudioFastTrackC400_DFU.sys ( MAudioFastTrackC400_DFU+11e8 )

Followup: MachineOwner
---------

And the driver is very old.

fffff880`05775000 fffff880`0577f000   MAudioFastTrackC400_DFU T (no symbols)           
    Loaded symbol image file: MAudioFastTrackC400_DFU.sys
    Image path: \SystemRoot\system32\DRIVERS\MAudioFastTrackC400_DFU.sys
    Image name: MAudioFastTrackC400_DFU.sys
    Timestamp:        Fri Jan 15 20:08:38 2010 (4B507DEE)
    CheckSum:         00016153
    ImageSize:        0000A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update it from M-AUDIO - Drivers and Software Search.

Uninstall the following bloatware:

Start Menu\Programs\ASRock Utility 
Start Menu\Programs\ASRock Utility\AsrAppCharger 
Start Menu\Programs\ASRock Utility\ASRock eXtreme Tuner
Start Menu\Programs\ASRock Utility\InstantBoot 
Start Menu\Programs\ASRock Utility\SmartConnect

Let us know the results. Something more might be there that I am failing to get right now I think :sarc: So waiting eagerly to see how it goes.

 

[soundsquire]

After checking the M-Audio support forums it seems there is an issue with system power settings. Someone else was having a similar problem because the system was sleeping and then causing a crash on wake and launch of the software that was using the interface. I have changed my system settings to never sleep and am hoping this helps.

Bingo! Solved!

This change in the power settings to not cut USB power and never sleep seems to have fixed this issue. Apparently the M-Audio interface does not like it when the host PC sleeps.

Thank you to SevenForums and all the contributors to this thread!

 

[Arc]

Good to know