BSOD while playing ARMA 2

[tek1t]

While playing ARMA2 my PC crashes out to the BSOD attached are all the files from the diag tool.

The system is a new build and i've had a few good days of use now it's giving me hell

any help would be greatly welcomed

-Tek1t

[EDIT]: changed filename to correct convention

 

[richc46]

Welcome
Most likely cause is hardware, but without knowing specifically what the cause, the process is lengthy. Before trying to diagnose the specific computer problem, lets rule out drivers another potential cause
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

 

[tek1t]

I have run driver verifier and no BSOD

 

[richc46]

Read the instructions for verifier, if you followed the instruction precisely, we will move on.
Remember, if we are wrong with the driver analysis, we may never find the cause if it is indeed a driver.

 

[tek1t]

Just as i posted that i got the BSOD, I followed the tutorial and selected all drivers that weren't microsoft

 

[richc46]

Good
May very well be hardware. Take these tests and report back
Initial Hardware Diagnostics
http://www.carrona.org/diag.html

 

[tek1t]

Passed all test from the initial diag and the additional ones too no BSOD or errors with the programs

 

[richc46]

Theres a problem, here. The memory test, alone takes hours. You could not have done them all so quickly. Follow these instructions for the memtest.
Run for 8 passes.
Then test each stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums

 

[tek1t]

ran all memory tests with no errors and used the programs that tax the system and the gpu and no BSOD

 

[richc46]

We need additional testing with verifier, turn it back on.

 

[tek1t]

those test were with it active i haven't turned it off

 

[richc46]

Turn if off and lets see what happens.

 

[tek1t]

Prime95 ean a little differently this time:

[Sat Aug 25 21:32:30 2012]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.4921875, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.49609375, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.49609375, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.4921875, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.

 

[richc46]

We have to go with that. Once you fix the problem, use the computer and see if you still get BSODs. It looks like we did find the problem.
I did not look it up, but if you took the memtest, Id say your problem is with the CPU, just a hunch.