BSOD while playing Binding of Isaac, and one while changing theme

[Jubawub]

So I was almost done with a challenge when my screen goes blank. Out of both BSoDs the screen never actually shows an error screen, it just reboots, however Windows says it was a BSoD.
It happened again while changing my window color.
I have a 3rd party theme if that shows up, it's Soft7 2.0.
Sorry but that's all I can give, I will upload the zip as instructed.

 

[essenbe]

Jubawub, I will try to help you. You have 2 dump files. Both give no information except you are getting an 0X124 error. That is a general hardware error, which means some component of your computer has failed or that you have a very bad driver which is making a hardware component act as though it has failed.

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Please click start, in the search box type Device manager, please post a screenshot of device manager
http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

 

[Jubawub]

I ran both sfc and chkdsk, and it said it resolved issues, but here's that picture of Device Manager anyway. I forgot I still need to install the Ethernet Driver, but I use WiFi so I haven't needed to.

 

[essenbe]

Please run the Video Card Stress test, Furmark. Watch it very closely, the temps will go up quickly and very high. If the temps get too high stop the test. Also watch for artifacts during the test. Run the test until you have to shut it down or the temps stabilize. Please post a screenshot of the test while it is running. http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html