BSOD While playing FFXI/FFXIV + more.

[Aytoshi]

I've been struggling with this for over a year now. Always seem to rid myself of it for a few days then it just comes right back. Finally at my end with it and decided its time to seek out help from more knowledged people than myself. There is no consistency in the rate it happens I can go all day, a couple days, or I wont even make it 10 minutes back to back without having to stare at the joy of the BSOD. If somebody could figure this out i'd appreciate it cause I have ran out of ideas other than throwing this laptop infront of a vehicle.

 

[koolkat77]

The cause of your BSOD's are this driver:

CM2793.sys Sat Sep 18 14:17:03 2010
Snakebyte FFXIV gamepad controller driver One recommended fix = uninstall the driver

Driver Reference Table - CM2793.sys​

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall Daemon Tools.

DuplexSecure - FAQ​

As an alternative, many people recommend the use of Total Mounter or Magic ISO

Use the System File Checker tool and Run Disk Check:

Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errors​

Make scans with -

TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US

Online Virus Scanner Eset​

Uninstall Sunbelt Firewall Software and Ad-Aware Antivirus. Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:

Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free​

• :info: Do not start the trial version of MalwareBytes
  
  

You may also take a look at:

Good & Free System Security Combination​

   Information

• :info: Download and install Revo Uninstaller free from here:
  
  Download Revo Uninstaller Freeware​
  Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:

Piriform - Speccy

CPUID - HWMonitor​

BSOD SUMMARY:

[FONT="Lucida Console"]Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Thu Aug  8 16:38:27.785 2013 (UTC + 6:00)
System Uptime: 0 days 4:43:38.299
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for CM2793.sys
*** ERROR: Module load completed but symbols could not be loaded for CM2793.sys
Probably caused by : CM2793.sys ( CM2793+783 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Thu Aug  8 11:10:31.152 2013 (UTC + 6:00)
System Uptime: 0 days 1:17:43.650
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for CM2793.sys
*** ERROR: Module load completed but symbols could not be loaded for CM2793.sys
Probably caused by : CM2793.sys ( CM2793+783 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  pcsx2.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Thu Aug  8 09:52:17.723 2013 (UTC + 6:00)
System Uptime: 0 days 0:32:21.847
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for CM2793.sys
*** ERROR: Module load completed but symbols could not be loaded for CM2793.sys
Probably caused by : CM2793.sys ( CM2793+783 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  pcsx2.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Thu Aug  8 09:19:25.844 2013 (UTC + 6:00)
System Uptime: 3 days 18:56:48.968
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for CM2793.sys
*** ERROR: Module load completed but symbols could not be loaded for CM2793.sys
Probably caused by : CM2793.sys ( CM2793+783 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  pcsx2.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun Aug  4 14:22:05.818 2013 (UTC + 6:00)
System Uptime: 0 days 2:55:11.728
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for CM2793.sys
*** ERROR: Module load completed but symbols could not be loaded for CM2793.sys
Probably caused by : CM2793.sys ( CM2793+783 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun Aug  4 11:25:58.366 2013 (UTC + 6:00)
System Uptime: 2 days 10:05:05.490
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for CM2793.sys
*** ERROR: Module load completed but symbols could not be loaded for CM2793.sys
Probably caused by : CM2793.sys ( CM2793+783 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``[/FONT]

 

[Aytoshi]

How would I locate and uninstall that driver? I was under the impression I had already uninstalled / deleted it.

 

[koolkat77]

To perform a clean install of a driver, You can follow this tutorial:

How to Clean Left Over Driver Files with Driver Sweeper​

 

[koolkat77]

Any update?