BSOD while playing gta 5

[madnuts]

hey guys every now and then when playing gta 5 I get the bsod
please see attached file TIA

 

[ICIT2LOL]

Hello and welcome Peter mate there are errors for the graphics and I would advise that you uninstall the Catalyst Control Centre if you have it on board first.
My other question is have you recently updated the GPU card? if not it is worth reseating the device mate. See below file dump readout.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8b019ee5018, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800f587a00, If non-zero, the instruction address which referenced the bad memory
 address.
Arg4: 0000000000000005, (reserved)
Debugging Details:
------------------

Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000430a100
GetUlongFromAddress: unable to read from fffff8000430a1c0
 fffff8b019ee5018 Paged pool
FAULTING_IP: 
atikmdag+17da00
fffff880`0f587a00 8b4108          mov     eax,dword ptr [rcx+8]
MM_INTERNAL_CODE:  5
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
BUGCHECK_STR:  0x50
PROCESS_NAME:  GTA5.exe
CURRENT_IRQL:  0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME:  fffff8800aeacf30 -- (.trap 0xfffff8800aeacf30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8a019ee8000 rbx=0000000000000000 rcx=fffff8b019ee5010
rdx=fffff8a01a3e8000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800f587a00 rsp=fffff8800aead0c8 rbp=00000000000002cf
 r8=00000000000002cf  r9=fffffa80122663e0 r10=fffffa800c7ea270
r11=00000000001f0003 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
atikmdag+0x17da00:
fffff880`0f587a00 8b4108          mov     eax,dword ptr [rcx+8] ds:fffff8b0`19ee5018=????????
Resetting default scope
LAST_CONTROL_TRANSFER:  from fffff800041477aa to fffff800040cd8c0
STACK_TEXT:  
fffff880`0aeacdc8 fffff800`041477aa : 00000000`00000050 fffff8b0`19ee5018 00000000`00000000 fffff880`0aeacf30 : nt!KeBugCheckEx
fffff880`0aeacdd0 fffff800`040cb9ee : 00000000`00000000 fffff8b0`19ee5018 fffff800`04040400 fffff8b0`19ee5010 : nt! ?? ::FNODOBFM::`string'+0x3fda1
fffff880`0aeacf30 fffff880`0f587a00 : fffff880`0f4cf50f fffff8a0`1a3e8000 00000000`00000001 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`0aead0c8 fffff880`0f4cf50f : fffff8a0`1a3e8000 00000000`00000001 00000000`00000000 00000000`00000000 : atikmdag+0x17da00
fffff880`0aead0d0 fffff8a0`1a3e8000 : 00000000`00000001 00000000`00000000 00000000`00000000 fffff8a0`1a3eb0b8 : atikmdag+0xc550f
fffff880`0aead0d8 00000000`00000001 : 00000000`00000000 00000000`00000000 fffff8a0`1a3eb0b8 fffff880`0f53b72b : 0xfffff8a0`1a3e8000
fffff880`0aead0e0 00000000`00000000 : 00000000`00000000 fffff8a0`1a3eb0b8 fffff880`0f53b72b fffffa80`11567980 : 0x1

STACK_COMMAND:  kb
FOLLOWUP_IP: 
atikmdag+17da00
fffff880`0f587a00 8b4108          mov     eax,dword ptr [rcx+8]
SYMBOL_STACK_INDEX:  3
SYMBOL_NAME:  atikmdag+17da00
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: [COLOR=red]atikmdag[/COLOR]
IMAGE_NAME:  [COLOR=red]atikmdag.sys[/COLOR]
DEBUG_FLR_IMAGE_TIMESTAMP:  551b0419
FAILURE_BUCKET_ID:  [COLOR=red]X64_0x50_atikmdag+17da00[/COLOR]
BUCKET_ID:  X64_0x50_atikmdag+17da00
ANALYSIS_SOURCE:  KM
FAILURE_ID_HASH_STRING:  [COLOR=black]km:x64_0x50_atikmdag+17da00[/COLOR]
FAILURE_ID_HASH:  {855e2253-929e-a96e-05de-b231efcdea54}
Followup: MachineOwner

SLOT CLEANING

Now as for the slots toclean them use a strip of old credit card (or any card thin enough some arebetter than others ) about 1/2 inch wide nip the corners off one end - preferably round them off hold a piece of thin lint free cloth over theend dab on some form of alcohol - isopropyl alcohol (what we swab the skin withbefore an injection) is good and GENTLYswipe along the slots.

This can also be done for the GPU slot/s andalso the contacts of the sticks or cards - not the stick but some lint freecloth of course. See my pic for the sick but please be very gentle doing it ifyou are in any doubt - please ask before doing it but I use this all the timeand have yet to damage anything

 

[madnuts]

thanks for the info it is a new board so I don't think it needs cleaning but uninstalled catalyst so ill see how it goes now

 

[ICIT2LOL]

Ok mate but it wouldn't hurt just to reseat everything all the same