BSOD Win7 X64 error! changed major components and still BSOD!

[yearzoro]

Windows 7 x64
Windows 7 is the original installed OS
Retail Vers.
System is a year old
OS install is less than 2 Months old


I am having issues trying to narrow down what is causing my computer to keep crashing. I have just about changed every single part in my computer and am going nutts. Some of the error I get are...

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff80002e86a63.

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002e95d09

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002e88d09)

0x0000003b (0x00000000c0000005, 0xfffff960001229d0, 0xfffff88005c24010, 0x0000000000000000)

0x00000050 (0xfffffa804c27cfe0, 0x0000000000000001, 0xfffff88004f899e1, 0x0000000000000005)


If I remember correctly this error started when I installed Norton 360 V2010. It is uninstalled now but it continues to happen. This was not happening at all before. The Case is well ventilated and has access to air. The Processor is cooled with an Arctic Cooling Freezer 7 Pro.


The parts replaced on my computer are

Mother board- EVGA 780i
Graphics- 2X Gforce 8800GTS 512mb
Processor- from a Q6600 to a Q9550
Memory tested using memtest for 6 days. All dimms pass.

Attached you will find all my dumplogs and all the other files required to help with the issues. Please help. Thanks guys!

 

[zigzag3143]

I am having issues trying to narrow down what is causing my computer to keep crashing. I have just about changed every single part in my computer and am going nutts. Some of the error I get are...

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff80002e86a63.

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002e95d09

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002e88d09)

0x0000003b (0x00000000c0000005, 0xfffff960001229d0, 0xfffff88005c24010, 0x0000000000000000)

0x00000050 (0xfffffa804c27cfe0, 0x0000000000000001, 0xfffff88004f899e1, 0x0000000000000005)


If I remember correctly this error started when I installed Norton 360 V2010. It is uninstalled now but it continues to happen. This was not happening at all before. The Case is well ventilated and has access to air. The Processor is cooled with an Arctic Cooling Freezer 7 Pro.


The parts replaced on my computer are

Mother board- EVGA 780i
Graphics- 2X Gforce 8800GTS 512mb
Processor- from a Q6600 to a Q9550
Memory tested using memtest for 6 days. All dimms pass.

Attached you will find all my dumplogs. Please help. Thanks guys!

Your most frequent bugcheck is 7F
Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

You have a ton of DMP files it is going to take a bit. back soon


Ken

 

[yearzoro]

Thanks so Much Ken. I am very thankful for your time helping me out.

 

[zigzag3143]

Thanks so Much Ken. I am very thankful for your time helping me out.

Cant PM you, so I left a VM. majority of the crashes caused by netio.sys. usually related to Zone Alarm. suggest you remove to test

Ken

 

[yearzoro]

I am not using ZoneAlarm. I am however, Using Norton Internet Security 2010. I down graded from Norton 360 because I feel like that program is what caused the issue. I also have a MoBo that uses 2 network adapters that work together. They have always worked in linked mode and don't know if that could be the cause...

 

[reventon]

You also see netio.sys blamed when Norton is the cause.

I would recommend that you uninstall this for testing purposes.

Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Then go to desktop, RIGHT-click on the NRT icon and select Run as Administrator.

When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Then reset the Windows Firewall to its default settings -
START -> type cmd.exe -> right-click -> run as administrator -> type netsh advfirewall reset press enter

 

[yearzoro]

I think that did the trick! I am still testing the computer. Having it do stuff on the net, running the processor and mem hard! Lets see if it crashes. Thanks.